How are you labeling your electrical wires behind the panel?

Mine are currently just handwritten on masking tape, and the area behind my panel is starting to look like a birds nest.  As I finish my wiring, I'd like clean things up as much as practical.

What's worked for other builders...?

Thanks,

Pat
N63PZ



Views: 461

Reply to This

Replies to This Discussion

just to add Pat, does anyone have a professional wiring schematic that you would like to share with us?
Print up small labels. Cut the paper and clear shrink wrap the printed paper to the wire. Don't use to much heat or you may discolor the paper. I do this for each end of the wire. Learned this in the Bob Nukols book AeroElectric Connection, http://www.aeroelectric.com/

YMMV
Hi Pat, I used the approach that Ron describes with the clear shrink wrap except that I used a Casio KL-820 Label Maker for the labels. I printed the labels on 6mm wide tape which fit nicely in the clear shrink wrap (see pic at link below). Be sure to label both ends of your wires. This same label maker was handy as it prints on 6mm white on clear label tape which I also used on my panel. regards //Dave

well I thought I included a link and can't see it now .. let's try this:

http://home.comcast.net/~davegardea/panel_%26_wiring.html#20
I found some small zip ties that have a "flag" about 5mm x 10mm suitable for an ultrafine Sharpie handwritten label. They are still legible and have worked well for me. They came from Stein Air;

http://www.steinair.com/cableties.htm

Ed
Get white heat shrink flatten it out and number or label with a fine tip sharpie then shrink it on the wire. Now shrink wrap clear over it and it looks great, writing shrinks and is easily read.
Write wire identification on heat shrink with a sharpy it will work fine after shrinking the writing looks a lot better as well.
you can make it easy by using idents like XPNDR GND, VHFCOM 12V write down on your diagram what ident you use, you might forget, and it makes trouble shooting easy. Clear shrink has a low melting point than white.
Pat, I did the method recommended in AeroElectric and used the Dymo LetraTag to make the labels. It also works great to make labels for the panel, etc. It makes great flag labels for wires and is a better solution in most cases since you can make a label with the wire name twice with spaces in between (radio radio) when you wrap around the wire the name is on both sides. This is very handy.

It's available at Walmart, but here's a link to Amazon.

http://www.amazon.com/DYMO-LetraTag-Personal-11944-Silver/dp/B00005...

One nice feature is that there are a number of different tapes, white, clear, metal, etc. and they come in cassettes, so you can change quickly.

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...

                                                     

Weather Maps


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, power distribution panel, Approach Fast Stack harnesses, Dynon and Garmin avionics, and more.


Custom Upholstery Kits for your Zenith Aircraft:

Zenith Vinyl Upholstery Kits


Zenith Apparel from EAA:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

Aircraft Insurance:

 
 

West Coast USA:

Transition Training:

Pro Builder Assistance
 

Pro Builder Assistance

Aircraft Spruce & Specialty for all your building and pilot supplies!

© 2019   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service