Online Community of Zenith Builders and Flyers
Does anyone have a digital flap indicator for the position of the linear actuator. I ran across this company here that sells what looks to be an easy setup to add an indicator, however I am unsure of the wiring from the actuator. If anyone has any other ideas I'd be open to those as well. We are just looking for a digital indication of the actuator and not something mechanical.
Based on that wiring I am assuming there is no fuse or breaker associated with these items either the actuator or elevator servo? My wiring diagram does not show one.
I have a Control Vision EXP-2 BUS DC Power Panel / Load Center. I think this DC load center switch panel is a type of electronic fuse panel, so I guess it could be fused in that sense, but I'm not smart enough to read these diagrams (attached) well enough to know for sure. I hope this helps.
Hi Jared, I know you said 'not mechanical' but it does work, ref: http://www.zenith.aero/group/stolch750/forum/topics/flaperon-indicator. My version: