How to remove painted screws? - Zenith Aircraft Builders and Flyers2024-03-29T15:44:11Zhttps://zenith.aero/forum/topics/how-to-remove-painted-screws?feed=yes&xn_auth=noSorry, I didn't see this thre…tag:zenith.aero,2023-03-02:2606393:Comment:8943552023-03-02T15:16:48.226ZFrank Stutzmanhttps://zenith.aero/profile/FrankSTutzman
<p>Sorry, I didn't see this thread until just now. Too late to help, but...</p>
<p></p>
<p>Completely agree about the vampiers! One of the best tools I have ever bought. One of my Beechcraft buddies recommended them and they are great at getting the corroded screw out of a 70+ year old airframe. Maybe a touch expensive, but completely worth it. </p>
<p></p>
<p>Also if you are worried about messing up painted on screws, there are specialized paint cutters for various sized screws. See …</p>
<p>Sorry, I didn't see this thread until just now. Too late to help, but...</p>
<p></p>
<p>Completely agree about the vampiers! One of the best tools I have ever bought. One of my Beechcraft buddies recommended them and they are great at getting the corroded screw out of a 70+ year old airframe. Maybe a touch expensive, but completely worth it. </p>
<p></p>
<p>Also if you are worried about messing up painted on screws, there are specialized paint cutters for various sized screws. See <a href="https://www.aircraftspruce.com/catalog/topages/screwpaintcutteran8.php" target="_blank">https://www.aircraftspruce.com/catalog/topages/screwpaintcutteran8.php</a> I have never used them, so I can't say how well they work. Might not be useful on some screws.</p> Here's an update in case anyo…tag:zenith.aero,2023-03-01:2606393:Comment:8937902023-03-01T19:23:41.972ZMatt Popehttps://zenith.aero/profile/MattP
<p>Here's an update in case anyone else is looking for a solution to this or a similar problem:</p>
<p></p>
<p>After trying several different things, the only product that really worked for me is called Vampliers. They're pliers with serrated jaws that are designed to grab the head of the screw, and wow do they work! I stumbled across them while looking for something else online and I'm sure glad I did. They work on most of the screws right away, but for the most stubborn screws I carefully…</p>
<p>Here's an update in case anyone else is looking for a solution to this or a similar problem:</p>
<p></p>
<p>After trying several different things, the only product that really worked for me is called Vampliers. They're pliers with serrated jaws that are designed to grab the head of the screw, and wow do they work! I stumbled across them while looking for something else online and I'm sure glad I did. They work on most of the screws right away, but for the most stubborn screws I carefully grind a bit off opposite sides of the head with a Dremel cutoff wheel and that creates more surface area for the Vampliers to sink their teeth into.</p>
<p></p>
<p>I see there are hundreds of five star ratings for these things on Amazon, and I'd agree. The price/value ratio is excellent considering the number of hours of frustration they're saving me.</p>
<p></p>
<p></p>
<p></p>
<p><a href="https://storage.ning.com/topology/rest/1.0/file/get/10978409292?profile=original" target="_blank" rel="noopener"><img src="https://storage.ning.com/topology/rest/1.0/file/get/10978409292?profile=RESIZE_710x" class="align-left" width="600"/></a></p> If you stick with screws, spe…tag:zenith.aero,2022-05-14:2606393:Comment:8692652022-05-14T01:15:22.501ZBob Pustellhttps://zenith.aero/profile/BobPustell
<p>If you stick with screws, spend the extra bucks for stainless steel screws for reassembly. They are much less inclined to rust or glue themselves into place. Also, place a nylon washer under each screwhead - this greatly reduces dissimilar metals corrosion by seperating the aluminum from the stainless steel.</p>
<p></p>
<p>If anyone is considering screws for a new build, I cannot strongly enough recommend stainless screws with nylon washers under the heads. I have been using them for many…</p>
<p>If you stick with screws, spend the extra bucks for stainless steel screws for reassembly. They are much less inclined to rust or glue themselves into place. Also, place a nylon washer under each screwhead - this greatly reduces dissimilar metals corrosion by seperating the aluminum from the stainless steel.</p>
<p></p>
<p>If anyone is considering screws for a new build, I cannot strongly enough recommend stainless screws with nylon washers under the heads. I have been using them for many decades and almost never have a stuck in place screw. I do have the luxury of hangaring the plane(s) most of those years, but some of them lived outside and did just as well in my experience.</p> That's what I was thinking, b…tag:zenith.aero,2022-05-11:2606393:Comment:8690272022-05-11T16:00:06.507ZMatt Popehttps://zenith.aero/profile/MattP
<p>That's what I was thinking, but I'll have to cross that bridge when I get to it. </p>
<p>That's what I was thinking, but I'll have to cross that bridge when I get to it. </p> If Matt lucked-up and the cor…tag:zenith.aero,2022-05-11:2606393:Comment:8691012022-05-11T11:45:20.668ZJohn Austinhttps://zenith.aero/profile/JohnLAustin
<p>If Matt lucked-up and the corrosion and/or hole enlargement/distortion wasn't very much, perhaps the rivet holes could be upsized such as going from an A4 to an A5? However, as in all things concerning modifying major structures, a consultation with Zenith would be in order!</p>
<p>If Matt lucked-up and the corrosion and/or hole enlargement/distortion wasn't very much, perhaps the rivet holes could be upsized such as going from an A4 to an A5? However, as in all things concerning modifying major structures, a consultation with Zenith would be in order!</p> I would get one or two screws…tag:zenith.aero,2022-05-11:2606393:Comment:8689242022-05-11T01:07:27.813ZDaniel Niendorffhttps://zenith.aero/profile/DanielNiendorff
<p>I would get one or two screws out nicely and look very carefully at the hole size and condition of the aluminum underneath. As you mentioned rusting screws it seems very likely that you will find corrosion from dissimilar metals under the screw head. If you are fortunate enough to avoid that, it sounds like the holes may well be oversize for riveting back together…. In either case you are stuck replacing a larger section of material, so getting the rest of it off neatly may not really…</p>
<p>I would get one or two screws out nicely and look very carefully at the hole size and condition of the aluminum underneath. As you mentioned rusting screws it seems very likely that you will find corrosion from dissimilar metals under the screw head. If you are fortunate enough to avoid that, it sounds like the holes may well be oversize for riveting back together…. In either case you are stuck replacing a larger section of material, so getting the rest of it off neatly may not really matter…..</p>
<p></p>
<p>Just my 2 cents</p> Thanks, John, those are great…tag:zenith.aero,2022-05-10:2606393:Comment:8690872022-05-10T23:00:51.190ZMatt Popehttps://zenith.aero/profile/MattP
<p>Thanks, John, those are great tips. I hadn't heard of JIS before - I'll see if that shape grabs any better. </p>
<p></p>
<p>Your idea of painting the tank covers separately is genius.</p>
<p></p>
<p>Drilling out rivets is pretty easy, so if anyone else has screws in their wings, replace them with rivets before it's too late!</p>
<p></p>
<p>Thanks, John, those are great tips. I hadn't heard of JIS before - I'll see if that shape grabs any better. </p>
<p></p>
<p>Your idea of painting the tank covers separately is genius.</p>
<p></p>
<p>Drilling out rivets is pretty easy, so if anyone else has screws in their wings, replace them with rivets before it's too late!</p>
<p></p> As far as the paint gluing th…tag:zenith.aero,2022-05-10:2606393:Comment:8690832022-05-10T21:08:23.086ZJohn Austinhttps://zenith.aero/profile/JohnLAustin
<p>As far as the paint gluing the screws in place, one trick is to get a cheap set of hole punches (like those used to punch holes in a leather belt, etc.) and try to find one that's the exact diameter of the screw head and use the punch to cut the paint around the periphery of the screw head being very careful not to nick the aluminum panel. I've also found that sometimes a JIS (Japanese Industrial Standard - has sharper corners on the bit vs a Phillips) screwdriver will grip some…</p>
<p>As far as the paint gluing the screws in place, one trick is to get a cheap set of hole punches (like those used to punch holes in a leather belt, etc.) and try to find one that's the exact diameter of the screw head and use the punch to cut the paint around the periphery of the screw head being very careful not to nick the aluminum panel. I've also found that sometimes a JIS (Japanese Industrial Standard - has sharper corners on the bit vs a Phillips) screwdriver will grip some Phillips-head screws better and is not as prone to strip them out. If you think the corrosion is making the screw more resistant to remove, then definitely try a penetrating fluid (obviously the paint will have to be cut for it to get to the threads) and let it work for a while before attempting removal.</p>
<p>They actually make JIS screwdrivers that you do whack on the handle and it twists the bit like an impact gun, - they're great to remove screws from the engine on an old Honda motorcycle, but a wing isn't strong enough to resist that kind of impact and you'd wind up ruining the structure of the wing!</p>
<p>If you have to strip the paint, auto body supply shops sell a paint stripper called "Klean Strip Aircraft Ultra Paint Remover." Wear a respirator if you use it, it's very potent!</p>
<p>On my 750 STOL, I guessed that I might someday need to access the fuel senders (which turned out to be true when they <em>both</em> started leaking years later) so I painted my top wing root panel separately and after fueling the aircraft for the first time and letting it sit a day or two to ensure no leaks, I then riveted the panel and touched up the heads of the rivets with paint. Drilling out rivets is relatively easy and apparently much easier than removing corroded screws! The panel came off easily and since it was painted separately, there was no paint "gluing" it down and no paint disturbed in the removal and reinstallation.</p>
<p>John</p>
<p>N750A</p>