A Horizontal Stabilizer - Mandatory Inspection has been added (Jan 17) to Zenith Company website; Builder Resources, applicable to all models.  Will study, pertinent to my project.  Thought others, would be interested.

(Sorry JohnA, entry also in Cruzer forum - do as you may, but a worthy notice, possibly otherwise missed), JohnH

Views: 1571

Reply to This

Replies to This Discussion

John-

Agreed

Since mine is a homebuilt and not manufactured by AMD, any issued AD would not "technically" apply to my ship. Of course the verbiage for me would be an SAIB, but I think differentiating the two is nothing more than mental masturbation.

I think the bigger picture (In my small mind, that is) is this;

The information regarding the problem and inspection is now out there on the web in addition to the Zenith website. If my ship and the accident ship have enough parts commonality, I think there is an obligation to perform the inspection. It may be a pain in the ass to disassemble the tail to look at four bolt holes, but as inspections go, its not that onerous.

Look at it from the viewpoint of someone who is not a 601 owner/operator; 

if you wanted to buy a 601 and you knew this Canadian directive came out, wouldn't the first three questions be;

1) How much are you asking for the plane?
2) Did you perform the 6ZU spar mods?

3) Did you comply with the Canadian inspection directive?

The other interesting point is that the inspection is yearly. If the issue was one of fabrication wouldn't a one-time inspection to confirm proper construction techniques were used suffice?  This leads me to believe that they feel fatigue, time in service may exacerbate the problem

Do I HAVE to comply?-no, not at the moment

AM I going to comply?-yes

My humble opinion

Brad Cohen

N969BC

Excuse my bluntness ...  This was a significant oversight during the original build. 

Assuming I visualized the drawings in the MA(?) properly, this area would be difficult if not impossible to inspect after closing up the stabilizer's front/wrap around skin. 

Not sure what the legal requirement of any of this is in the US. Maybe someone can clarify (??). 

Thinking out loud ... Taking the stabilizer off the plane and the associated parts with it doesn't come without potential risk as well. Seems that maybe a visual inspection using a bore scope or similar of the stabilizer's front attachments would be a safer first step before requiring a blanket removal/inspection. Especially if you are confident that the HT attachments to the tail didn't contain any gaps, etc. On the flip side, if there is any chance the plane has exposed to high winds directly or indirectly, I can definitely see the justification for full inspection. 

Don

Don Honabach

Don,

I agree and think you've summarized the issue pretty well. This advisory is not about a design defect - it is about poorly fabricated and installed parts.  Personally, I paid particular attention to this area when I built my STOL 750 and shimmed any bracket per Caleb's (the then-engineer at Zenith) instructions to eliminate any gaps.  The attachment bolt holes were drilled slightly undersized and then reamed for a precision fit.  I also had multiple inspections by an A&P and an A&P IA during my build.

Of course, this is not an AD and AD's aren't issued on EAB's in the US, so IMHO there is no legal requirement for any of us in the US, but it should be a wake-up call for all of us to ensure we follow accepted and best practices in assembling our aircraft. This inspection might be a good idea if one did not personally construct their aircraft and especially if they have found evidence of sloppy construction elsewhere!

 Unless there is new or different information to persuade me otherwise,  I'm not removing my HT for inspection and agree there is a potential for doing more harm than good by breaking down the assembly.  I check for HT security before every flight and annually inspect the attachment brackets under magnification with a borescope. I sleep well at night,  too!  ;>)

John

N750A

I did a visual inspection and all four bolts are solid with no indication of wear. They were painted 800 hours ago and look just like new. I see no reason to remove and inspect as said by Matt Heinz. However, I will be more careful to check these on preflight. Roger CH601HD. N16BZ
Thanks John.

Your thoughts/process on this was my gut take as well. Appreciate the clarification on US requirements!

Don
Just received an email from Matt Heinz regarding my inquiry pertaining to my CH601HD: "A visual inspection is not sufficient. Remove the 4 bolts and inspect."
Funny enough, in Canada, there are no AD's present for my airframe, aircraft on TC's website. Just thought that if Transport was so concerned, there would be SOMETHING pertaining to my registration. They don't miss other AD's. Very odd imo.

Chad

RSS

New from Zenith:

Zenith Aircraft For Sale 

Classified listing for buying or selling your Zenith building or flying related stuff...

                                                     

Weather Maps


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, power distribution panel, Approach Fast Stack harnesses, Dynon and Garmin avionics, and more.


Custom Upholstery Kits for your Zenith Aircraft:

Zenith Vinyl Upholstery Kits


Zenith Apparel from EAA:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

 

Zenith transition and Sport Pilot training:

Quality Sport Planes
Cloverdale, California:

Wheels & Wings

Pro Builder Assistance

© 2019   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service