O200 Continental oil temp gradually going up to 240+ degrees. Doesn’t seem to matter what angle. Any suggestions on what to try?

Views: 178

Reply to This

Replies to This Discussion

Hi Douglas,  what's the ambient temperature, and how are your CHT's?  My oil gets up to about 210 on a 90 degree day.  Also, have you verified your oil temp sensor accuracy?  My MGL setup was 30F off before I calibrated it.

The simplist and most obvious would be to check for baffle leaks or air bypassing cylinder fins.

 Mine ran 225-235 on my first flights, that was with a fresh overhauled Continental not broken in and I'd have to back off to keep temps from climbing. After a few tweaks on intake inlet size  and exit cowl size, adding a lip at the exit cowl, and completing the break in process, I've got mine stabilized in the 190-205 range on summer days here in Texas where you are. As Clint asked, what are your CHT's? Ultimately, that will be the key to dropping your oil temps.

Also forgot to ask, are you making your first flights with a fresh overhauled engine?

Here is some additional info you might consider, by adding these under engine baffles and cutting some holes in my cowl I lowered my oil temp by 8-10F. This was after I spent some time getting my CHT's optimized.

Attachments:
My o200 is mid time so no break in problems. I don’t have cht probes. All of the heat is staying on top of the engine. My exhaust runs out the bottom so there is not a very large exit area for the heat. I changed lip some with no change. Wondering if I should put more vents on cowling or change my exhaust location. Where is the best place for vents?

Hi Douglas,  Do you have any pictures of your cowl outlet?  I had to make a rather large change to get my CHT's down on warmer days, thankfully most of my test flight period was done during the colder months, so I had a good safety margin while figuring things out.  It seems most folks have found that the cowl outlet size and geometry is very important for allowing hot air to escape. But send some pictures of your inlet, outlet, and baffles if you can, it might help spur some other ideas.  My exhaust is quite different than the zenith setup, but the zenith setup has worked for others it will work for you too, might take some experimenting.

Attachments:

Speaking of changes to the cowl outlet size, I am including a photo of how much I changed mine and how I added a lip to it. That change, along with increasing the cowl intake sizes by about 3/4” in height, helped to get my cht’s and oil temps down to good numbers even on hot summer days. The minimum ratio of inlet to outlet sq. inches is 1 to 1.5, and that is the minimum. The outlet can be larger and it only helps.

Cowl outlet mods

Intake mods

My exhaust is straight pipes exiting out the bottom. I’ll take some pictures. Thanks

i'm running with an oil cooler, no problems with oil temps, only mod is a lip on the cowl outlet

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, power distribution panel, Approach Fast Stack harnesses, Dynon and Garmin avionics, and more.


Custom Upholstery Kits for your Zenith Aircraft:

Zenith Vinyl Upholstery Kits


Zenith Apparel from EAA:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Golden Eagle Aviation

Pianosa Flying Farm

Aircraft Spruce & Specialty for all your building and pilot supplies!

© 2020   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service