It'll be some time before I need an instrument panel for my CH750, BUT, just like engines, there's a LOT of choices as far as instrumentation and I want some time to think about it and perhaps look at specific brands at AirVenture next month.

 

I've got about 2500 hrs in a C206 with an EFIS, IFR GPS, AnywhereMap on a yoke-mounted tablet with XM Weather, etc. I still have the 206 for my "traveling" machine. My intention with the CH750 was a basic VFR plane for "puttin' around" the beautiful Sequatchie Valley in E Tenn where I live. Therefore, since my typical flight will be low and slow with eyeballs mostly outside the cockpit, I thought just a very basic panel was in order ... "steam gauges (traditional round gauges)", an intercom, and a radio. IF I wanted GPS/weather capability, I have my tablet with AnywhereMap and XM weather.

 

One of my friends is a prolific builder and his latest RV has all the glass bells and whistles. He pointed out to me that some of the very basic glass panels would give me navigation AND engine instrumentation for very little more than separately buying all the assorted flight instruments and engine instruments.

 

Since this would apply to ALL the Zenith aircraft, I thought this discussion might be better placed in the Open Forum.

 

What's your opinion or experience? Can you truly buy some glass panel that comes close to the price of getting all the round gauges for flight and engine instrumentation? Or, is there some combo of round gauges and glass that would be the best bang for the buck? Remember, I'm talking for a strictly daytime/VFR plane, no IFR, etc. If someone has priced out various combos, I'd love to know the bottom line!

Regards,

John

Views: 1459

Reply to This

Replies to This Discussion

My CH750 has Dynon D180 for flight & engine instruments, ICOM A210 radio & GARMIN GTX 327 Mode C transponder. I fly as an Advanced Ultra Light Aircraft in Canada (LSA in USA). It was about $600 more to buy the D180 vs. traditional 6-pack of steam guages for engine & flight....with out the artificial horizon that the D180 includes. A very simple panel to build...the wiring was the toughest part. I only flew steam guages until I built the CH750....my CH601HD has steam guages with a Grand Rapids EIS for the Rotax 912 engine. My Advanced Ultralight CH750 cannot legally fly at night or IFR, but it has full lighting & instruments. The D180 is also used as a altitude info source for the Garmin mode C transponder instead of an encoder.

Another question might be; "are you comfortable with a glass panel you installed, and which may be unproven in your configuation, as your sole source of information?"

 

I don't trust the glass panel under those conditions. I installed minimum steam gauges to get up and flying. I plan to install a glass panel later, leaving it in parallel with the steam gauges until I'm convinced I can trust it. Then I may remove the steam gauges.

 

It also lets me defer the cost of the panel until later. I'm on a budget - the glass panel I want would cost much, much more than the steam gauges. I can find some non-TSO'd steam gauges fairly cheap that will do the task.

John - It really boils down to what kind of flying that you reasonably expect to do with the 750. The non.TSO'd do come fairly cheap and make quick reading (not installation) easy.  I have a Grand Rapids that I mainly use for oil temp, oil pressure, and rpm; I fly mainly daytime VFR but I am night time VFR capable. I also have a Garmin 500 that I really like. For weather I use my iphone. I do suggest a turn coordinator to show wings level in the event of unintended fog entrance. There's no doubt there are tons of glass out there that will do the job. I personally like to keep things simple (no button pushing) for a "puttin around" machine.

Good Luck and Safe Flying

Chris

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service