I bought a used certified Gamin 327 transponder for my 601. I m now ready to wire the inputs. I have a copy of the instillation manual, but I have a few questions I hope I can find answers here. All I want is for the transponder to work, not hooked up to anything else. I plan at a later date to install an ADS B system that does not need to be wired directly to my transponder.

According to the instructions the rear connector has a J3271 plug. The top, looking at the rear, is numbered 1-13 0n top and 14-25 on the bottom. 

Pin 1-     Avionics Master on ?

Pin 13-   Power Ground

Pin 14-   Switched power output

Pin 16- external stand by ?

Pin 24- 14 VDC Panel lighting

Pin 25-   Power ground

Are pins 13 & 25 the same thing?  Does pin one just need a positive voltage when the nav /avionics is turned on? pin 16, is that required? all I want to do is have the minimal wiring to the transponder, any help would be appricated

Gil

Views: 330

Reply to This

Replies to This Discussion

Hi Gil
Without looking at the wiring diagram, if your PIN numbers are correct, and you want the minimum,
You need pin 1, power, pin 13 and 25 grounds, you can tie them together and ground them to a single ground, you don't need 14, 16, or 24.
Yes, pin 1 needs a positive voltage when the nav/avionics are on.
The reason you want the power off the avionics buss is so that transponder is off when you start the aircraft to prevent any voltage spikes from damaging the transponder.
Let me know if you need any more info.
Dave

I took the pin numbers right out of the instillation manual. There is also a photo of the socket. Thanks for the information. It is what I thought, but didn't want to blow anything up. There is an additional cable and plug with the wiring harness, but I figured it must be for other uses such as an altimeter or something.

Gil

Gil
You will need to hook up a altitude encoder,
That's probably what the extra wires are for.

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service