fuselage cage 750 - Zenith Aircraft Builders and Flyers2024-03-28T09:21:02Zhttps://zenith.aero/forum/topics/fuselage-cage-750?commentId=2606393%3AComment%3A221312&feed=yes&xn_auth=noYes, that's what worked for m…tag:zenith.aero,2012-06-24:2606393:Comment:2214252012-06-24T21:21:35.253ZAaron Mayhttps://zenith.aero/profile/AaronMay
Yes, that's what worked for me.
Yes, that's what worked for me. thanks guys for the help. One…tag:zenith.aero,2012-06-24:2606393:Comment:2214222012-06-24T21:10:25.948ZPhilip James Westonhttps://zenith.aero/profile/PhiloWestovich
<p>thanks guys for the help. One other question, the small hole in the cage goes into the lowest hole on the fuselage like on the upper mount, Correct?</p>
<p>thanks guys for the help. One other question, the small hole in the cage goes into the lowest hole on the fuselage like on the upper mount, Correct?</p> I just completed this, and al…tag:zenith.aero,2012-06-24:2606393:Comment:2213162012-06-24T11:28:41.411ZAaron Mayhttps://zenith.aero/profile/AaronMay
I just completed this, and also had to trim 10-15 mm from the bottom of each tube. You might actually cut into the weld slightly. There's no other choice if you want it to fit right. There is a thread on the 750 forum about it. I am pleased with how mine turned out, but didn't think it would fit when I first set it on there. It will start to come together quickly once you trim off a few mm's.
I just completed this, and also had to trim 10-15 mm from the bottom of each tube. You might actually cut into the weld slightly. There's no other choice if you want it to fit right. There is a thread on the 750 forum about it. I am pleased with how mine turned out, but didn't think it would fit when I first set it on there. It will start to come together quickly once you trim off a few mm's. If I recall I had to cut abou…tag:zenith.aero,2012-06-24:2606393:Comment:2213122012-06-24T05:42:14.567ZRANDY L HALLOCKhttps://zenith.aero/profile/RandyLHallock
<p>If I recall I had to cut about 10-15mm off the bottom to line up with rivet holes.</p>
<p></p>
<p>If I recall I had to cut about 10-15mm off the bottom to line up with rivet holes.</p>
<p></p>