I'm trying to finish up the fuel tank install, and the fittings at the most inboard end seem too tight. The pictures show it out of the threads, and then tightened with a wrench a little bit. To tighten much more would take a lot of force.

Should I keep tightening it down? Is this part of how it seals? Or is this far enough?

IMG_0963.jpgIMG_0964.HEICIMG_0965.HEICIMG_0966.HEIC

Views: 176

Reply to This

Replies to This Discussion

Are you familiar with NPT  or gas threads? the hole and the fitting are tapered.

I looked into it, thanks! I can't find a lot of specifics of how tight it should be. 

From what I have found, about 1-2 full turns after it's hand tight?

There is no rule except "snug." If it leaks, it is not snug enough. If you over tighten you can wreck the threads or even possibly split something.

I could not get your picture to appear, but as Geoff said these are tapered pipe threads.  The key to these threads is the use of the proper sealant.  In all actuality the name sealant is not quite right, but it is the normal term.  The "sealant" actually primarily performs a lubricating function allowing the threads to tighten properly.  There are rarely torque values published for tapered pipe thread fittings, but snug will create a proper seal with the right thread sealant.  Loctite 567 is the recommended sealant for aviation fuels.

Thank you so much!

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...

                                                     

Weather Maps


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, power distribution panel, Approach Fast Stack harnesses, Dynon and Garmin avionics, and more.


Custom Upholstery Kits for your Zenith Aircraft:

Zenith Vinyl Upholstery Kits


Zenith Apparel from EAA:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

Aircraft Insurance:

 
 

West Coast USA:

Transition Training:

Pro Builder Assistance
 

Pro Builder Assistance

Aircraft Spruce & Specialty for all your building and pilot supplies!

© 2019   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service