Now that I am on my 3rd flight into Phase I on my UL350i Cruzer I noticed that my fuel psi is below min. I am only getting 29 psi in flight. I am using a Skytek header tank like David Beaulieu--he is getting the numbers advertised by UL. I used 1/2" fuel lines from the tanks to the Skytek then 3/8" from the header to the firewall. Am curious as to what others are getting for fuel psi. 

Views: 309

Reply to This

Replies to This Discussion

My fuel pressure maintains a fairly constant 43-44 psi with either pump.  I don’t have a header tank and my supply lines are 3/8 id.  I have a 350is in my stol 750 with100 hours on it.  I think I would be talking to UL if I were you, as 29 is low.

Hi again,

  Just curious if your fuel pressure is good before you start your engine, if so, does it drop at idle or under power?  Also, your FADEC should be switching pumps if the main one is not holding pressure - have you tried manually switching pumps?  Several questions on why you are getting low readings, but if the engine was performing correctly with the first 3 flights, I would start by checking with a different fuel pressure tester.  Just my thoughts....

Hey guys thanks for the suggestions and advice. Very much appreciated. I did call Ray at UL and told him my story. He pretty much knew exactly what the problem was. He told me to go to the sensor mapping page on my Skyview and check to see what flavor of Kavlico sensor was being used for fuel pressure. I saw that it was the Kavlico 50 psi sensor but remembered that I had actually ordered the 75psi version. I changed the value and then tried both pumps and voila--I was getting 42 psi!

I think that crisis has been averted. Thanks again guys for helping out!

Doug, I too was indicating low FP so after reading this I checked and had the 50psi Kavlico unit programmed into Skyview while I actually have the 75 psi unit. Now shows 42 psi. Thanks very much for pursuing this and posting your finding. Tom


New from Zenith:

Zenith Planes For Sale 

Classified listing for buying or selling your Zenith building or flying related stuff...

Custom Instrument Panels
for your Zenith

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.

Custom Upholstery Kits for your Zenith Aircraft:

Zenith Vinyl Upholstery Kits

Zenith Apparel from EAA:

Zenair Floats

Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz

Builder & Pilot Supplies:

How to videos from

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit for the latest DVD titles.

Aircraft Insurance:


West Coast USA:

Pro Builder Assistance:


Transition training:

Golden Eagle Aviation

Pianosa Flying Farm

Aircraft Spruce & Specialty for all your building and pilot supplies!

© 2021   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service