Are people using the rubber gas lines firnished in the kits or using braided stainless? I know we are building experimental, but using the rubber lines seem risky when dealing with a potential (or eventual) gas leak.

Views: 7522

Reply to This

Replies to This Discussion

The conductive carbon coating is needed because static sparks will be generated and they cause pinhole failures in the teflon tube.

‘’I started with Earls stainless and teflon. It’s bullet proof but heavy and hard to work with. I then found “Goodridge” stainless and teflon racing hose which is much more flexible, lighter and easier to use. You have to be careful  not to over tighten the end fittings or the nut will crack. I got all of it from Pegasus racing. (Goodridge g line xf 811 hose and fittings)

If I was building again, I’d use aluminium tubing as much as possible along with the Goodridge hose for flexible sections.

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Custom Upholstery Kits for your Zenith Aircraft:

Zenith Vinyl Upholstery Kits


Zenith Apparel from EAA:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Golden Eagle Aviation

Pianosa Flying Farm

Aircraft Spruce & Specialty for all your building and pilot supplies!

© 2021   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service