I’ll soon start building my CH 750 STOL. Although I’m a long way from needing floats, I’d like to incorporate the fittings in my initial build rather than have to do a retrofit later. Does anyone have a set of Zenair amphibious float fittings their willing to sell? Thanks, Tom

Views: 130

Reply to This

Replies to This Discussion

Just a heads up on the float mount…..  if they mount the same as the 801 (which I think they do),  the front mount bar will likely affect your cowl exit airflow.  If you are going to mount an air cooled engine, take this under consideration, as you might end up need to make other adjustments to compensate for this.  

Hello Daniel:
Thanks for the heads up. I haven’t seen the float mounts for either the CH 750 or the 801, but I would assume that they are similar in design. My plan is to install a UL Power UL350 for power. The engine is air cooled.
Your message indicates that you have experience fighting the engine cooling gremlins. Insofar as I have absolutely no interest in “reinventing the wheel” may I inquire as to the details of your experience so I may benefit from same? Thanks.
Regards,
Tom

I have the IO-375 (low compression pistons, 195 HP), which produces a lot of heat.  Knowing this at the start, I built with a larger  firewall mounted oil cooler. I originally flew on wheels, without the float hardware.  This configuration worked pretty well.  When I installed the float mount, the cowl exit area was effectively reduced and I had trouble with hot temps.  I ended up adding cowl adjustable flaps which allowed for increased exit area.  
Pic shows the yellow mount bar across the cowl exit, and also cowl flaps.

Thank you Daniel. I very much appreciate the information and the photo. I’ll certainly keep it in mind as I build my airplane. I admire the clever way you installed the cowl flaps to address the cooling issue. Thanks again.
Regards,
Tom

Dave Beaulieu (on this forum) has a 750 STOL with a UL power engine on floats.  I think he could probably tell you more precisely what to expect in your situation.  He also did a very nice write up in the floats forum providing some performance information for that combo.  It is a must read.

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Custom Upholstery Kits for your Zenith Aircraft:

Zenith Vinyl Upholstery Kits


Zenith Apparel from EAA:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Golden Eagle Aviation

Pianosa Flying Farm

Aircraft Spruce & Specialty for all your building and pilot supplies!

© 2021   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service