Im plans building a 750, and I would like someone who is KIT building to take some measurements for me.  The plans do not show where to drill the spar line.  Is someone could please measure from the rear most bend of the flap to the spar line that would help me along.  Any takers?

Views: 314

Reply to This

Replies to This Discussion

Hi Jesse!  I have my flaperons in the extra bedroom...waiting for the fuselage to be completed.  I'll be happy to take some measurements tomorrow...it's 11:30 PM here.  If I understand you right, you would like the dimension from the trailing edge along the skin surface to the rivet line at the spar.  Is that correct?  I'll send a picture of what I'm measuring along with the dimensions.  Frank Pisz

that would be awesome.  Im sure we can clear up any problems with the pictures to make sure we are on the same page.  You da man.

Hi Jesse!  Sorry this took so long...I had two customers to take care of this morning.  Anyway, I measured 191 mm from the trailing edge to the centerline of the rivet line on the convex side of the flaperon and 186 mm from the trailing edge to the centerline of the rivet line on the flat side of the flaperon.  The pictures below show how the measurement was taken.  Hope this helps.

that's awesome.!! thanks

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...

                                                     

Weather Maps


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, power distribution panel, Approach Fast Stack harnesses, Dynon and Garmin avionics, and more.


Custom Upholstery Kits for your Zenith Aircraft:

Zenith Vinyl Upholstery Kits


Zenith Apparel from EAA:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

Aircraft Insurance:

 
 

West Coast USA:

Transition Training:

Pro Builder Assistance
 

Pro Builder Assistance

Aircraft Spruce & Specialty for all your building and pilot supplies!

© 2019   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service