I installed an aftermarket rocker switch rather than the switch supplied with the kit, and it has finally broken.  I have what I think is the original toggle switch as supplied by Zenith and would like to install it:

You may be able to see that the lower set of terminals are labeled "A1, A2, A3" and the upper row of terminals are "B4, B5, B6."

Does anyone have a wiring diagram for this switch or at least know which terminal(s) are +12V power?

Thanks,

John

N750A

Views: 1560

Reply to This

Replies to This Discussion

This would be the standard setup for a switch like that.  You can of course double check with a test light or meter.

Thanks, John B - Looks like +12V power and ground would have to go to the middle terminals (A2, B2, or on my switch, A2, B5) since they're the only ones in common with "UP" or "DOWN."

I just found this "Instructables" link: How to Wire a DPDT Reverse Polarity Switch

John A

My old switch obviously already had jumpers connecting the terminals:

I hooked up the new switch (without jumpers) putting the +12V and ground on the middle terminals and connecting the 2 flap motor terminals to a pair of terminals on the same end of the switch.  The flap motor worked in one direction.  So, looks like I need to make some crossing jumpers and it should work either direction.

John

That should work.  I have added a picture of the wiring diagram from the plans.  This way when I forget about this and need to look up this post in the future it will be here.

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service