I'm looking for a Corvair engine mount for Zenith 701.   Any available?

Views: 314

Reply to This

Replies to This Discussion

hi jack check azalea aviation he made one for me did a good job talk to  bill clapp,,

Thanks I will. BTW what was his cost?

i dont remember excactly i was the only 701 corvair flying had over 250 hours on it untill the owner had a very hard landing    i thought it was around 5-600.00 dollars but you have to call him    229-834-8996


William Wynn or Dan Weseman should also be able to fabricate one for you. 

Here is the very extensive page from all the work they did on the 701/Corvair combination.



Check Gary Richmond at topsaddle [at] att [dot] net.  A month or so ago, he had a Corvair/CH701 mount that was reputed to have been fabricated by Roy's Garage.


New from Zenith:

Zenith Planes For Sale 

Classified listing for buying or selling your Zenith building or flying related stuff...

Custom Instrument Panels
for your Zenith

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, power distribution panel, Approach Fast Stack harnesses, Dynon and Garmin avionics, and more.

Custom Upholstery Kits for your Zenith Aircraft:

Zenith Vinyl Upholstery Kits

Zenith Apparel from EAA:

Zenair Floats

Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz

Builder & Pilot Supplies:

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

Aircraft Insurance:


West Coast USA:

Pro Builder Assistance:


Transition training:

Golden Eagle Aviation

Pianosa Flying Farm

Aircraft Spruce & Specialty for all your building and pilot supplies!

© 2020   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service