I have been fighting elevator travel on my plans built 601xl for too long now. I have checked the plans many times and can find nothing wrong.When the cables are at the proper tension the bottom cable drags on the last bulkhead. should the cables be the exact length.Help ,what am I doing wrong .Wade Jones

Views: 334

Reply to This

Replies to This Discussion

is there a nylon fairlead there? Is it touching the upper edge of the lightening hole?

If it is just barely touching/dragging, just trim the conflicting aluminum away and/or put a fairlead or rub strip there. It is is a significant conflict, then find out what is not right and fix it.

Wade,

I'm also a plans builder.  My drawing set is at the hanger, but I thought I remember the plans calling for a nylon rubbing block there.  I'll check when I'm at the airport tomorrow.

I have a strip of nylon on the top of the hole in the last bulkhead for the elevator cable.  It was called out for in the plans (page 6-B-1 of my 2006 version).  On this same topic, I also have two pieces of nylon on the bottom skin "L" just in front of where the rudder cable exits the side skins. The cable ran a little too close for comfort.  I did not see it called out in the plans, but I added it for piece of mind.

 

Good luck,

 

Dave

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service