While wrapping my stabilizer I dinged the leading edge of the skin. It is very small, but noticeable. My question for the group is how big of an issues is that? I understand it is minimal, aerodynamically, but how much will it show after paint? How much does painting cover up “imperfections”? Thanks all. 

Views: 388

Reply to This

Replies to This Discussion

A picture would be helpful as someone's idea of "small" can vary considerably.  LOL!  However, any dent in the skin is going to show - paint will NOT cover it up  but it may be a bit less noticeable.  However, if it is indeed very small, sometimes the only person who notices it is the builder.

If you haven't riveted yet, depending on location, sometime you can work it out a little by massaging it on the back side with a spoon.

John

N750A

And, if you are going to paint it, you can use a little bit of light weight filler (a Bondo like product for aircraft that fills and patches like Bondo but weighs a lot less (and cost more than) Bondo. You cannot use patching materials on a polished aluminum surface (because it will show) but under paint it will be fine.

To keep the weight of the filler down, try and push out the dent as much as you can as described by John Austin, then smooth the banged up area the rest of the way with the filler. If you cannot get at the back side to push the dent out, then your only option is to fill it with the lighweight filler, sand it smooth, and paint. Or, just leave the dent and live with it.

Thanks gentlemen. Turns out the “massaging” it out with a spoon worked like a champ! I appreciate the timely and useful responses. 

This works.  Thank you.  I was freakin' out when I tweaked the stab skin but its most of the way back to normal using the spoon.

Pete

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service