Does anyone have a good way to cut the aluminum sheet so you don't get the sheer marks and ripples?

Views: 619

Reply to This

Replies to This Discussion


Look for previous posts for an Olfa knife.

You scribe along a straight edge and then can bend sheet back and forth till it separates along scribe line. 

Clean up edge with files, sand paper etc and you are done.

Works very good in many applications.

A super tool and not expensive.

I agree with Jerold, the Olfa is the way to go.  It does a beautiful job. It is a high quality scribing knife designed for cutting tile. Here is a link to a discussion on using the Olfa ---


Not all tin snips (hand shears) are created equal (some are better quality than others). Also it helps to not make such large cutting motions; take small bites and keep the shearing action in closer to the pivot of the shear. Distortion seems to more pronounced out near the tips (points) of the hand shear. Also it is best to first cut about 1/4” outside of the desired cut and then go back and trim the remainder off.

There is nothing like having a foot shear, though.

Good luck,


The Olfa P-800 is commonly used to cut aluminum sheet. 

Use a straight edge.

Score Score Score Score ...

Bend at score mark.

I couldn't find a specific video showing it. Although I know I've seen one. However, here's a link to a guy talking about the concept that might help if you've never seen someone do it. Although, the Olfa P-800 knife works great and I would see little if any need for improvement for a hobby/project build type environment.

No ripples with this method. Easy edge clean up. Best method IMHO for a home type shop. Maybe one downside is that this doesn't work unless the sheet is well back (i.e. on table, etc.). 

Also, while aviation snips and similar do tend to leave ripples, with a little practice these can be minimized or effectively eliminated. Angling the cutting edge helps. Doing a rough pass and leaving a 1/8" or so will help build up confidence/techniques. I always leave a 1/16" to 1/32" edge to file away if I have to use aviation snips. I've also found planing tools like the Surform to be work really well. Although a bit tricky on 0.016 if you're not careful.



I used cheap long bladed scissors, using just the inside half. Cut beautifully. Recommended to me by an engineer who'd scratch built a 701. Was the first hint he gave me!

Pneumatic "air nibbler"... Best.....Tool.......EVER!!!! 

Buy the videos from  "Metalworking 101" and  "Scratch building basics for metal aircraft" will be the answer to most if not all of your questions.


New from Zenith:

Zenith Planes For Sale 

Classified listing for buying or selling your Zenith building or flying related stuff...


Weather Maps

Custom Instrument Panels
for your Zenith

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, power distribution panel, Approach Fast Stack harnesses, Dynon and Garmin avionics, and more.

Custom Upholstery Kits for your Zenith Aircraft:

Zenith Vinyl Upholstery Kits

Zenith Apparel from EAA:

Zenair Floats

Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz

Builder & Pilot Supplies:

How to videos from

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit for the latest DVD titles.

Aircraft Insurance:


West Coast USA:

Pro Builder Assistance:


Transition training:

Golden Eagle Aviation

Pianosa Flying Farm

Aircraft Spruce & Specialty for all your building and pilot supplies!

© 2020   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service