Online Community of Zenith Builders and Flyers
Horiz, vertical stabilizer, rudder and wings complete, except for flaperons (have parts). Project has sat a few years. I thought I'd move on to buying and building the fuselage but my life got in the way. I guess it is time to sell what I have completed. I live in northeast Illinois area so pickup would be preferred. Make me an offer.
I haven't thought it through. If you are local you can stop by and see everything. I would accept a reasonable offer.
The wings are wired with single tanks and the strobes work. One end of one wing has to be modified slightly as I made a mistake in my cut but I have the replacement piece. The horizontal stabilizer trim tab is installed and can be tested as the servo works. I did not put the flaperons on the wings but have the parts. You can have the manual and all spare parts, etc. I documented the entire build in software and you can have that also.
I live in northwest indiana would not mind coming and taking a look after Christmas if you are fairly close, and reasonable on the price. How old of kit is it?
Contact me after Christmas. I invested about $7000 in the project in materials.
These are the kits I purchased:
FLAPERONS & LEADING-EDGE SLATS KIT
fuel system kit
ELECTRIC TRIM TAB KIT (Elevator)
I am located in Fox Lake, IL by the Wisconsin border.
I am out of town at the moment and cannot look up my serial number so you would know the age of the kit. I am registered as a kit builder with Zenith air. I will post it when I return.
It is now well after the Holidays and we should all be rested:)
I am in Fox Lake which is about 1:30 min from Madison WI...if that helps. Let me know if you are still interested in the project.
I am in Fox lake, IL and it takes, no traffic, about 1:15-1:30 to get here from Chicago...if that helps.
My serial number is 75377
What is the status on the parts? I'm interested in the parts. please feel free to email firstname.lastname@example.org. I would intend to pick them up.