Horiz, vertical stabilizer, rudder and wings complete, except for flaperons (have parts).  Project has sat a few years.  I thought I'd move on to buying and building the fuselage but my life got in the way.  I guess it is time to sell what I have completed.  I live in northeast Illinois area so pickup would be preferred.  Make me an offer.  

Views: 962

Reply to This

Replies to This Discussion

Colleen, just wondering if you had a price in mind?
Please let me know Gerry

I haven't thought it through.  If you are local you can stop by and see everything.  I would accept a reasonable offer.  

The wings are wired with single tanks and the strobes work.  One end of one wing has to be modified slightly as I made a mistake in my cut but I have the replacement piece.  The horizontal stabilizer trim tab is installed and can be tested as the servo works.  I did not put the flaperons on the wings but have the parts.  You can have the manual and all spare parts, etc.   I documented the entire build in software and you can have that also.   

Well, the problem is I live in northwest WI, so to Chicago is about 7hours. Ther is a guy iN Manitoba with the stuff I need and he has offered it to me for $2500.00. How close in price is that to what you were thinking? By the way I am not sure where you live, close to Chicago?

I live in northwest indiana would not mind coming and taking a look after Christmas if you are fairly close, and reasonable on the price.  How old of kit is it?

Contact me after Christmas.  I invested about $7000 in the project in materials.  

These are the kits I purchased:

WINGS KIT  
FLAPERONS & LEADING-EDGE SLATS KIT 
TAIL KIT 
fuel system kit 
ELECTRIC TRIM TAB KIT (Elevator)

I am located in Fox Lake, IL by the Wisconsin border.

I am out of town at the moment and cannot look up my serial number so you would know the age of the kit.  I am registered as a kit builder with Zenith air.  I will post it when I return.

Gerry,

It is now well after the Holidays and we should all be rested:)

I am in Fox Lake which is about 1:30 min from Madison WI...if that helps.  Let me know if you are still interested in the project.

-Colleen

I am in Fox lake, IL and it takes, no traffic, about 1:15-1:30 to get here from Chicago...if that helps.

-Colleen

Any chance of some pictures? Have you found your serial yet?

Cheers,
Paul

My serial number is 75377

 Colleen,

  What is the status on the parts?   I'm interested in the parts.  please feel free to email jacbat@yahoo.com.    I would intend to pick them up.

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Custom Upholstery Kits for your Zenith Aircraft:

Zenith Vinyl Upholstery Kits


Zenith Apparel from EAA:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Golden Eagle Aviation

Pianosa Flying Farm

Aircraft Spruce & Specialty for all your building and pilot supplies!

© 2021   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service