CH601XL - Positioning of flap control plate - Zenith Aircraft Builders and Flyers2024-03-29T10:19:35Zhttps://zenith.aero/forum/topics/ch601xl-positioning-of-flap-control-plate?xg_source=activity&feed=yes&xn_auth=noThx for the hint! I will try…tag:zenith.aero,2020-04-22:2606393:Comment:7184202020-04-22T22:34:26.578ZMartin Pohlhttps://zenith.aero/profile/MartinPohl
<p>Thx for the hint! I will try to shorten the rod form the actuator to the flap torque tube lever arm (the two bolt holes are already drilled and the flaps are both down by a symmetrical ammount). That should work.</p>
<p>Thx for the hint! I will try to shorten the rod form the actuator to the flap torque tube lever arm (the two bolt holes are already drilled and the flaps are both down by a symmetrical ammount). That should work.</p> I match drilled the connectio…tag:zenith.aero,2020-04-22:2606393:Comment:7184132020-04-22T17:56:37.416ZWilliam Stewarthttps://zenith.aero/profile/WilliamStewart
<p>I match drilled the connection between the flap arm that connects to the flap actuator and the two torque tubes going to the flaps. I installed the flaps in position and pulled them up against the stops, set the actuator to full up, and then match drilled the holes for the two bolts. I don't know of any way to make adjustments by measuring.</p>
<p></p>
<p>If you've already drilled the two bolt holes, and the flaps are down a symmetrical amount, you may be able to adjust the rod length from…</p>
<p>I match drilled the connection between the flap arm that connects to the flap actuator and the two torque tubes going to the flaps. I installed the flaps in position and pulled them up against the stops, set the actuator to full up, and then match drilled the holes for the two bolts. I don't know of any way to make adjustments by measuring.</p>
<p></p>
<p>If you've already drilled the two bolt holes, and the flaps are down a symmetrical amount, you may be able to adjust the rod length from the actuator to the flap torque tube lever arm.</p> Here are the plans from CZAW…tag:zenith.aero,2020-04-21:2606393:Comment:7182672020-04-21T17:17:57.381ZMartin Pohlhttps://zenith.aero/profile/MartinPohl
<p>Here are the plans from CZAW for the flap control plate.</p>
<p>Here are the plans from CZAW for the flap control plate.</p>