Online Community of Zenith Builders and Flyers
Hello friends, I have a Zenith CH 750 project for sale. This was a project between my son and I that I am afraid we will have to let go of. We started this project almost two years ago but since my retirement and my son going off to engineering school, I am afraid we have lost direction and time and this project deserves someones full attention and shouldn't be on the back burner. We have acquired just about every piece to assemble the plane besides the engine and dash electronics. I have well over 30000 in receipts and if you consider this a quick build option someone is really going to get a good deal. I havea current transponder and anair three way fuel selector and well as the full tool kit and every nut, rivet and wire needed. I ordered the float mount kit from canada air ($700) as it needs to be mounted before the engine mount. I ordered the dual stick, full upholstery, everything is power coated, bubble windows, nav,strobe and landing lights, have dual fuel tanks, stainless braided fuel lines, have the 708 ecu and full wiring harness ready for a viking or raven rotors honda, line tension tool, every angle drill and rivet tool and all the clecos one could need.. I also have all the build videos and manuals and am surely missing a bunch. also the tundra tires and dual brakes. I have the fuselage and one wing mostly finished. The plane is located about two hours west of chicago and I have a enclosed trailer if delivery needs to be arranged. Thanks for looking and please contact my son
Kevin at 815-441-5151 text or call and leave a message and we will get back to you. IMAG0385.jpgIMAG0383.jpgIMAG0387.jpgIMAG0388.jpgIMAG0395.jpgIMAG0396.jpgIMAG0397.jpgIMAG0398.jpgIMAG0399.jpgIMAG0402.jpgIMAG0405.jpgIMAG0403.jpgIMAG0407.jpgIMAG0408.jpgIMAG0409.jpgIMAG0411.jpgIMAG0412.jpg
That is a fabulous deal ! Some lucky person that lives down there should grab that up !
do you still the float kit?