carb heat for aerocarb - Zenith Aircraft Builders and Flyers2024-03-29T00:49:29Zhttps://zenith.aero/forum/topics/carb-heat-for-aerocarb?commentId=2606393%3AComment%3A377756&feed=yes&xn_auth=noThanks for your input guys I…tag:zenith.aero,2014-09-15:2606393:Comment:3798342014-09-15T20:00:12.523ZTim Wiebehttps://zenith.aero/profile/TimWiebe
<p>Thanks for your input guys I appreciate it.</p>
<p>Thanks for your input guys I appreciate it.</p> Hello Tim
I built this carb h…tag:zenith.aero,2014-09-03:2606393:Comment:3777562014-09-03T13:06:32.954ZTimothy D. McCallhttps://zenith.aero/profile/TimothyDMcCall
<p>Hello Tim</p>
<p>I built this carb heat box and heat muff for the aerocarb. It's based from Mark Langford design and you can see more about it on his web site.</p>
<p> </p>
<p>Hello Tim</p>
<p>I built this carb heat box and heat muff for the aerocarb. It's based from Mark Langford design and you can see more about it on his web site.</p>
<p> </p> Hi Tim,
I got the same AeroCa…tag:zenith.aero,2014-09-02:2606393:Comment:3774232014-09-02T11:35:17.306ZNormand Lamberthttps://zenith.aero/profile/NormandLambert
<p>Hi Tim,</p>
<p>I got the same AeroCarb (AeroInjector) you do and I got the same request from the MD-RA inspector. I had to install a shroud over the muffler to direct hot air from around it into an aluminum box to the AeroInjector ...</p>
<p>Not fun and NEVER used it even in february. Also, my engine is water cooled so the intake manifold is heated by the warm coolant around it. Go to my photos (page 9,10,11) you'll see how I did it. May give you ideas...</p>
<p></p>
<p>I dont think you have…</p>
<p>Hi Tim,</p>
<p>I got the same AeroCarb (AeroInjector) you do and I got the same request from the MD-RA inspector. I had to install a shroud over the muffler to direct hot air from around it into an aluminum box to the AeroInjector ...</p>
<p>Not fun and NEVER used it even in february. Also, my engine is water cooled so the intake manifold is heated by the warm coolant around it. Go to my photos (page 9,10,11) you'll see how I did it. May give you ideas...</p>
<p></p>
<p>I dont think you have a choice in this...Sorry.</p>
<p>Regards,</p>
<p>Norm</p>
<p>CH701 C-GFEU</p>