Saw a utube on 801 upgrades where the builder had the standard gear rebent 2 degrees for each side and effectively straighten the legs. Looks good in the video. Anybody know where and who can bend this thick gear? Thanks, Bill 

Views: 433

Reply to This

Replies to This Discussion

I had my Cruzer gear straightened a few weeks ago at the Zenith factory after a hard landing. Took the bare gear in and they fixed it while I went to lunch. I scheduled a date in advance with Roger when the press operator would be available.

Thanks Steven. Mex Mo is a long way from here(mid Ga). Anyplace in the southeast? Bill 

once the cold bent gear is rebent it will distort easier the second time , my advise is to contact Rob at grove gear and get a heat tempered and bent spring and be done with it BOB

I assume you were watching the video of one of the Patey boys 801. He stated that he thought that Zenith was now bending their gear the extra 2 degrees so you may want to verify if this has already been done to your gear legs since that video is now about 8 years old. That being said anyone with a heavy enough press and fixturing to support the gear leg and match the bend radius should be able to sucessfully bend the gear.  Some may want to upgrade to a Grove gear, some may not. There is no absolute right or wrong way. Do what you think is best for you. Dan

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service