Anyone use SPRL Fuel Selector Valve? - Zenith Aircraft Builders and Flyers2024-03-29T10:53:38Zhttps://zenith.aero/forum/topics/anyone-use-sprl-fuel-selector-valve?commentId=2606393%3AComment%3A686813&feed=yes&xn_auth=nohi Joe,
What extension did y…tag:zenith.aero,2019-08-19:2606393:Comment:6884012019-08-19T00:48:47.070ZRob Ahttps://zenith.aero/profile/RobertArchibald
<p>hi Joe,</p>
<p></p>
<p>What extension did you use? I see Aircraft Spruce has a 12" one with a universal joint but it's way too long and pricey. Is this what you used? I like the idea of mounting it on the floor like you explained.</p>
<p>hi Joe,</p>
<p></p>
<p>What extension did you use? I see Aircraft Spruce has a 12" one with a universal joint but it's way too long and pricey. Is this what you used? I like the idea of mounting it on the floor like you explained.</p> I installed one in the center…tag:zenith.aero,2019-08-18:2606393:Comment:6885782019-08-18T10:07:12.181ZMichel Rufhttps://zenith.aero/profile/MichelRuf
<p>I installed one in the center console. On/Off SPRL Valve</p>
<p>I installed one in the center console. On/Off SPRL Valve</p> I have on installed on my pro…tag:zenith.aero,2019-08-16:2606393:Comment:6883352019-08-16T20:34:10.085ZJoe Pringlehttps://zenith.aero/profile/JoePringle
I have on installed on my project. Haven't flown it yet. I mounted it on the floor under the center console, and used an extension to link the valve to the control know that is on the top of the console. This way, there is no low point in my fuel line except the gascolator.
I have on installed on my project. Haven't flown it yet. I mounted it on the floor under the center console, and used an extension to link the valve to the control know that is on the top of the console. This way, there is no low point in my fuel line except the gascolator. I didn't notice it on the pic…tag:zenith.aero,2019-08-06:2606393:Comment:6868242019-08-06T22:47:42.288ZJames Clapper Jr.https://zenith.aero/profile/JAMESCCLAPPERJR
<p>I didn't notice it on the pick list when I ordered the kit, but when it showed up, I was so impressed with the smoothness of operation, and quality of appearance, I re-plumbed my fuel system to make use of it. The 3 special fittings were included.</p>
<p>I didn't notice it on the pick list when I ordered the kit, but when it showed up, I was so impressed with the smoothness of operation, and quality of appearance, I re-plumbed my fuel system to make use of it. The 3 special fittings were included.</p> Good to know; I was thinking…tag:zenith.aero,2019-08-06:2606393:Comment:6868132019-08-06T20:40:31.054ZCarl Ortonhttps://zenith.aero/profile/CarlOrton
<p>Good to know; I was thinking about the Zenair kit, but not quite ready for it yet. Didn't know that selector was part of their kit....</p>
<p></p>
<p>Good to know; I was thinking about the Zenair kit, but not quite ready for it yet. Didn't know that selector was part of their kit....</p>
<p></p> The Newton valve is included…tag:zenith.aero,2019-08-06:2606393:Comment:6868992019-08-06T20:38:22.093ZJames Clapper Jr.https://zenith.aero/profile/JAMESCCLAPPERJR
<p>The Newton valve is included in the Zenair firewall forward kit for the O-200, if you are planning to purchase it.</p>
<p>The Newton valve is included in the Zenair firewall forward kit for the O-200, if you are planning to purchase it.</p> I have a slightly used Andair…tag:zenith.aero,2019-08-05:2606393:Comment:6866082019-08-05T21:19:51.889ZFred Williamshttps://zenith.aero/profile/FredWilliams
<p>I have a slightly used Andair valve /duplex with left /right and return. I ended up using a Viking header tank and did not need the valve. See previous post. make me a reasonable offer and it's yours. Included are 90 deg fittings. All AN6 . </p>
<p></p>
<p>Dr Fred</p>
<p>I have a slightly used Andair valve /duplex with left /right and return. I ended up using a Viking header tank and did not need the valve. See previous post. make me a reasonable offer and it's yours. Included are 90 deg fittings. All AN6 . </p>
<p></p>
<p>Dr Fred</p> I installed one in my 750 STO…tag:zenith.aero,2019-08-05:2606393:Comment:6867502019-08-05T01:06:07.563ZPaul Sandershttps://zenith.aero/profile/ukpylot
<p>I installed one in my 750 STOL and have had no complaints, works as advertised. They were also very quick and helpful when I asked some questions. I have no experience of these things to compare it with but the unit seemed sturdy and well made. </p>
<p>I installed one in my 750 STOL and have had no complaints, works as advertised. They were also very quick and helpful when I asked some questions. I have no experience of these things to compare it with but the unit seemed sturdy and well made. </p>