Help! I'm trying to get my 650 canopy to sit right on the hoops & side frames. I followed the builder's guide as far as placing the rear hoop... "in line" with the seat backs, then trimmed the hoop ends until everything sat on the roll-bar cradle... but it appears that it is way too tall. The canopy sides barely drop to the bottom edge of the side frames, and the rear of the canopy sits about 2" higher than the top of the rear bulkhead.

I believe my hoops are about 2" too tall. Does anyone have a perpindicular height from the baggage deck to the top of the rear hoop?

Views: 376

Reply to This

Replies to This Discussion

Brian, this may or may not apply (I'm a 601 plans builder) but I think the hoops are meant to be a little long, then trimmed because while it's easy enough to trim a little off, it's awfully hard to make them get longer to make up for variations in the plexi.

Yes Dan, the builder's photo guide shows that the hoops are trimmed to fit, and my rear hoop had about 3" trimmed off each side in order to sit in the roll-bar flange, with the hoop at the correct angle (straight line with the seat back). The problem is that the canopy will not sit low enough. When it is touching the rear hoop, it is still 2" above the rear top skin, and the sides are not at or below the side rails.
What I'd like to know is approximately how high above the longerons the hoop is, in a finished installation. This would give me a better understanding of what is going on.

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service