3300 Fuel Fitting - Zenith Aircraft Builders and Flyers2024-03-29T10:34:40Zhttps://zenith.aero/forum/topics/3300-fuel-fitting?feed=yes&xn_auth=noI wouldn't want to shove a ho…tag:zenith.aero,2019-05-18:2606393:Comment:6771252019-05-18T18:02:05.261ZLoren Warnerhttps://zenith.aero/profile/LorenWarner
<p>I wouldn't want to shove a hose over a flared fitting. Seems to me that Swaging the tube end would be better. <br/><br/></p>
<p><img alt="No photo description available." height="200" src="https://scontent-sea1-1.xx.fbcdn.net/v/t1.0-0/p200x200/18765598_448020748911722_8423332249051521139_n.jpg?_nc_cat=108&_nc_ht=scontent-sea1-1.xx&oh=0b47192b45350bad9f9f39573d9949b7&oe=5D682AE2" width="200" class="img"/></p>
<p>I wouldn't want to shove a hose over a flared fitting. Seems to me that Swaging the tube end would be better. <br/><br/></p>
<p><img alt="No photo description available." height="200" src="https://scontent-sea1-1.xx.fbcdn.net/v/t1.0-0/p200x200/18765598_448020748911722_8423332249051521139_n.jpg?_nc_cat=108&_nc_ht=scontent-sea1-1.xx&oh=0b47192b45350bad9f9f39573d9949b7&oe=5D682AE2" width="200" class="img"/></p> This link is the FWF Installa…tag:zenith.aero,2019-05-17:2606393:Comment:6770272019-05-17T03:12:06.280ZJohn Austinhttps://zenith.aero/profile/JohnLAustin
<p>This link is the <a href="https://st4.ning.com/topology/rest/1.0/file/get/2363518793?profile=original" rel="noopener" target="_blank">FWF Installation Manual</a> for the Jabiru 3300/Zenith STOL CH750. Section 8 details attaching a firesleeved rubber fuel line and hose clamp to this fitting.</p>
<p></p>
<p>I did not use this fitting since I used a PTFE-lined stainless braided fuel line (Earl's) and used an AN bulkhead fitting to transition through the…</p>
<p>This link is the <a href="https://st4.ning.com/topology/rest/1.0/file/get/2363518793?profile=original" target="_blank" rel="noopener">FWF Installation Manual</a> for the Jabiru 3300/Zenith STOL CH750. Section 8 details attaching a firesleeved rubber fuel line and hose clamp to this fitting.</p>
<p></p>
<p>I did not use this fitting since I used a PTFE-lined stainless braided fuel line (Earl's) and used an AN bulkhead fitting to transition through the firewall.</p>
<p></p>
<p>John</p>
<p>N750A</p>