15 hr engine service - Zenith Aircraft Builders and Flyers2024-03-28T18:05:56Zhttps://zenith.aero/forum/topics/15-hr-engine-service?xg_source=activity&feed=yes&xn_auth=noFYI...checked mine a few days…tag:zenith.aero,2018-07-08:2606393:Comment:6357122018-07-08T15:46:41.444ZDavid J. Beaulieuhttps://zenith.aero/profile/DavidJBeaulieu
<p>FYI...checked mine a few days ago and have ample clearance 3/16" plus. Engine is a Nov 2011 production</p>
<p>FYI...checked mine a few days ago and have ample clearance 3/16" plus. Engine is a Nov 2011 production</p> Glad I could be of help. tag:zenith.aero,2018-07-07:2606393:Comment:6357602018-07-07T22:42:44.313ZGary Motleyhttps://zenith.aero/profile/GaryMotley
<p>Glad I could be of help. </p>
<p>Glad I could be of help. </p> Thanks, I missed that at the…tag:zenith.aero,2018-07-06:2606393:Comment:6356522018-07-06T15:08:25.824ZRobert Riathttps://zenith.aero/profile/RobertDRiat
Thanks, I missed that at the 15hour inspection so I pulled the cowl today,<br />
with 30 hours on my testing and it was also wearing a little on the aluminum<br />
washer. I guess the good part is that the steel tube wasn't worn, only the<br />
aluminum. Seems like the factory needs to make a small correction on that tube.<br />
Thanks again -- I sure missed that.
Thanks, I missed that at the 15hour inspection so I pulled the cowl today,<br />
with 30 hours on my testing and it was also wearing a little on the aluminum<br />
washer. I guess the good part is that the steel tube wasn't worn, only the<br />
aluminum. Seems like the factory needs to make a small correction on that tube.<br />
Thanks again -- I sure missed that. Thanks for posting...now I'm…tag:zenith.aero,2018-07-06:2606393:Comment:6354002018-07-06T01:17:53.640ZDavid J. Beaulieuhttps://zenith.aero/profile/DavidJBeaulieu
<p>Thanks for posting...now I'm going to have to take a peek on mine! Dave</p>
<p>Thanks for posting...now I'm going to have to take a peek on mine! Dave</p> Hello Gary, I did the exact s…tag:zenith.aero,2018-07-05:2606393:Comment:6353042018-07-05T02:55:42.547ZTom Sullivanhttps://zenith.aero/profile/tomsullivan
<p>Hello Gary, I did the exact same thing. That same line also ran right along the engine case at the clamp. I got a longer bolt and installed a washer under the clamp to make clearance. Tom</p>
<p>Hello Gary, I did the exact same thing. That same line also ran right along the engine case at the clamp. I got a longer bolt and installed a washer under the clamp to make clearance. Tom</p>