All Discussions Tagged 'kit' - Zenith Aircraft Builders and Flyers2024-03-29T06:02:30Zhttps://zenith.aero/forum/topic/listForTag?tag=kit&feed=yes&xn_auth=noDIY Lift Reserve Indicator Kit - SOLD SOLD SOLDtag:zenith.aero,2022-01-12:2606393:Topic:8585742022-01-12T19:15:43.335ZRamesh Norihttps://zenith.aero/profile/RNMosaic
<p>Friends,</p>
<p>This is a kit I purchased from another Zenith builder here in this forum earlier. Here is the detail that I have.</p>
<p>---------------------</p>
<p>He assembled it together from various sources. There's plenty of info out there on the benefits of a Lift Reserve Indicator but many of the kits available go for $300+. This works strictly on air pressure, no power required. All that is needed to install this is to provide pitot tubing from your panel, where the gauge mounts,…</p>
<p>Friends,</p>
<p>This is a kit I purchased from another Zenith builder here in this forum earlier. Here is the detail that I have.</p>
<p>---------------------</p>
<p>He assembled it together from various sources. There's plenty of info out there on the benefits of a Lift Reserve Indicator but many of the kits available go for $300+. This works strictly on air pressure, no power required. All that is needed to install this is to provide pitot tubing from your panel, where the gauge mounts, to the LRI Pitot mounted under your wing. I provide the Template for the gauge, the Pitot and the Gauge. The Pitot is marked for where the High and Low pressure tubes attach. Kind of a no brainer installation. However here is a good installation and calibration method on this website:</p>
<p><a href="http://home.hiwaay.net/~sbuc/journal/liftreserve.htm" target="_blank" rel="noopener">http://home.hiwaay.net/~sbuc/journal/liftreserve.htm</a></p>
<p></p>
<p>All you need is some pitot tube to be run from this unit to the panel where gauge will be mounted.</p>
<p></p>
<p>My price is $100 including shipping to the lower 48 in a medium flat rate box.</p>
<p></p>
<p>My email is: rnmosaic at g mail dot com</p>
<p></p>
<p>Cheers,<br/> Ramesh </p>
<p><a href="https://storage.ning.com/topology/rest/1.0/file/get/10006411296?profile=original" target="_blank" rel="noopener"><img src="https://storage.ning.com/topology/rest/1.0/file/get/10006411296?profile=RESIZE_710x" class="align-left"/></a></p>
<p></p>
<p><a href="https://storage.ning.com/topology/rest/1.0/file/get/10006410499?profile=original" target="_blank" rel="noopener"><img src="https://storage.ning.com/topology/rest/1.0/file/get/10006410499?profile=RESIZE_710x" class="align-left"/></a></p>
<p><a href="https://storage.ning.com/topology/rest/1.0/file/get/10006410479?profile=original" target="_blank" rel="noopener"><img src="https://storage.ning.com/topology/rest/1.0/file/get/10006410479?profile=RESIZE_710x" class="align-left"/></a></p>
<p></p>
<p><a href="https://storage.ning.com/topology/rest/1.0/file/get/10006408275?profile=original" target="_blank" rel="noopener"><img src="https://storage.ning.com/topology/rest/1.0/file/get/10006408275?profile=RESIZE_710x" class="align-left"/></a></p>
<p><a href="https://storage.ning.com/topology/rest/1.0/file/get/10006408058?profile=original" target="_blank" rel="noopener"><img src="https://storage.ning.com/topology/rest/1.0/file/get/10006408058?profile=RESIZE_710x" class="align-left"/></a></p> Sold Sold !!!!!!! Stohl ch 750 fuselage assembled rudder blueprints and more !!tag:zenith.aero,2021-01-07:2606393:Topic:8006192021-01-07T00:49:13.191Zdale bakerhttps://zenith.aero/profile/09v61501rfgtt
<p>Sold !!!! on this website so bear with me please, I have acquired a STOL ch 750 fuselage completed from kit as far as I know ,rudder and horizontal wing , blueprints , serial number , box of misc parts , invoices from my customer shows he had parts labor nearly 12,000 invested would sell for 4,500.00 located in hutto Tx north of Austin Tx , acquired from large package deal gentlemen had unfortunately had a heart attack some time back . Thank you Dale </p>
<p>Sold !!!! on this website so bear with me please, I have acquired a STOL ch 750 fuselage completed from kit as far as I know ,rudder and horizontal wing , blueprints , serial number , box of misc parts , invoices from my customer shows he had parts labor nearly 12,000 invested would sell for 4,500.00 located in hutto Tx north of Austin Tx , acquired from large package deal gentlemen had unfortunately had a heart attack some time back . Thank you Dale </p> 601HD Fuselage , wings, tail Stabilizer for sale with Corvair mount and strutstag:zenith.aero,2020-10-30:2606393:Topic:7618832020-10-30T18:18:33.184ZJohn Masellihttps://zenith.aero/profile/JohnMaselli
<p>I am forced to let go of my Zenair 601HD project. Any reasonable offer will be seriously considered. The kit is located at KTMK, Tillamook Oregon in my hangar. This is an easily finished project and would make a nice plane for someone. I do have some corvair parts like a new reconditioned crankshaft and good case. The mount and front strut are newly powder coated in white. Please look at the pictures and let me know if …</p>
<p>I am forced to let go of my Zenair 601HD project. Any reasonable offer will be seriously considered. The kit is located at KTMK, Tillamook Oregon in my hangar. This is an easily finished project and would make a nice plane for someone. I do have some corvair parts like a new reconditioned crankshaft and good case. The mount and front strut are newly powder coated in white. Please look at the pictures and let me know if <a href="https://storage.ning.com/topology/rest/1.0/file/get/8095047487?profile=original" target="_blank" rel="noopener"><img src="https://storage.ning.com/topology/rest/1.0/file/get/8095047487?profile=RESIZE_710x" width="500" class="align-full"/></a><a href="https://storage.ning.com/topology/rest/1.0/file/get/8095030874?profile=original" target="_blank" rel="noopener"><img src="https://storage.ning.com/topology/rest/1.0/file/get/8095030874?profile=RESIZE_710x" width="500" class="align-full"/></a><a href="https://storage.ning.com/topology/rest/1.0/file/get/8095048497?profile=original" target="_blank" rel="noopener"><img src="https://storage.ning.com/topology/rest/1.0/file/get/8095048497?profile=RESIZE_710x" width="500" class="align-full"/></a><a href="https://storage.ning.com/topology/rest/1.0/file/get/8095058056?profile=original" target="_blank" rel="noopener"><img src="https://storage.ning.com/topology/rest/1.0/file/get/8095058056?profile=RESIZE_710x" width="500" class="align-full"/></a><a href="https://storage.ning.com/topology/rest/1.0/file/get/8095062475?profile=original" target="_blank" rel="noopener"><img src="https://storage.ning.com/topology/rest/1.0/file/get/8095062475?profile=RESIZE_710x" width="500" class="align-full"/></a><a href="https://storage.ning.com/topology/rest/1.0/file/get/8095068285?profile=original" target="_blank" rel="noopener"><img src="https://storage.ning.com/topology/rest/1.0/file/get/8095068285?profile=RESIZE_710x" width="500" class="align-full"/></a><a href="https://storage.ning.com/topology/rest/1.0/file/get/8095080663?profile=original" target="_blank" rel="noopener"><img src="https://storage.ning.com/topology/rest/1.0/file/get/8095080663?profile=RESIZE_710x" width="500" class="align-full"/></a><a href="https://storage.ning.com/topology/rest/1.0/file/get/8095046687?profile=original" target="_blank" rel="noopener"><img src="https://storage.ning.com/topology/rest/1.0/file/get/8095053290?profile=RESIZE_710x" width="500" class="align-full"/></a>interested. John Maselli 516-736-2484 I have more pictures. All manuals, tools also available.</p> Full Kit Cratetag:zenith.aero,2020-08-13:2606393:Topic:7324462020-08-13T16:35:01.076ZMatthew C. Pryorhttps://zenith.aero/profile/MatthewCPryor
<p>Is anyone in need of a full kit crate? Planning on picking up a kit of parts next month at the open house?</p>
<p>I'd be happy to deliver it to Mexico for a small fee, as opposed to breaking it down and taking it to the dump. Might save you a few dollars and give me some more building room.</p>
<p>Let me know.</p>
<p>flyingp@sbcglobal.net</p>
<p></p>
<p>Is anyone in need of a full kit crate? Planning on picking up a kit of parts next month at the open house?</p>
<p>I'd be happy to deliver it to Mexico for a small fee, as opposed to breaking it down and taking it to the dump. Might save you a few dollars and give me some more building room.</p>
<p>Let me know.</p>
<p>flyingp@sbcglobal.net</p>
<p></p> Zenith 701 for sale-Soldtag:zenith.aero,2020-04-01:2606393:Topic:7152432020-04-01T03:26:56.482Zsteve larsonhttps://zenith.aero/profile/stevelarson
<p>I am ready to sell kit #7-8343. It is about 95% complete(all surfaces are riveted). It has a Rotax 912uls, grove gun-drilled gear, bubble doors, auxiliary fuel tanks, stream-lined struts, electric trim, 4- position flap lever, Andair fuel selector, aero led strobes and landing light, 29” Airstreaks, 26” Goodyear front tire, Mgl avionics, Grove wheels, brakes and axles, Flightline fl-760 transceiver and 71” Kiev Propeller. I have wrapped fuselage and rudder with vinyl and have enough for the…</p>
<p>I am ready to sell kit #7-8343. It is about 95% complete(all surfaces are riveted). It has a Rotax 912uls, grove gun-drilled gear, bubble doors, auxiliary fuel tanks, stream-lined struts, electric trim, 4- position flap lever, Andair fuel selector, aero led strobes and landing light, 29” Airstreaks, 26” Goodyear front tire, Mgl avionics, Grove wheels, brakes and axles, Flightline fl-760 transceiver and 71” Kiev Propeller. I have wrapped fuselage and rudder with vinyl and have enough for the rest of the plane. Finish this beast and be flying by summer! I am asking $37k. Thanks! You can email me at steven5697@att.net for pictures and a detailed list of everything. </p> Zenith Factory Folding Wings Kit CH750 STOL - For Saletag:zenith.aero,2019-05-22:2606393:Topic:6777062019-05-22T18:31:32.599ZMark Baenenhttps://zenith.aero/profile/MarkBaenen
<p>From the Zenith Factory - Their Folding Wings Kit and Plans - 750 STOL</p>
<p></p>
<p>Originally I had planned on sharing a friend's hanger but luckily another hanger opened up at 93C and I didn't install this.</p>
<p></p>
<p>$450 + Shipping ($100 off)</p>
<p></p>
<p>Mark</p>
<p>From the Zenith Factory - Their Folding Wings Kit and Plans - 750 STOL</p>
<p></p>
<p>Originally I had planned on sharing a friend's hanger but luckily another hanger opened up at 93C and I didn't install this.</p>
<p></p>
<p>$450 + Shipping ($100 off)</p>
<p></p>
<p>Mark</p> 701 for sale due to death in the Familytag:zenith.aero,2018-06-12:2606393:Topic:6317962018-06-12T01:02:17.787ZRichard Rowlandhttps://zenith.aero/profile/RichardRowland
<p></p>
<p>Hello,</p>
<p>I have a partially complete 701 that was my fathers. He passed away over a year ago. Need to sell the kit. Appears to be all there. According to the paperwork, it cost about $14k plus shipping. Will take offers at half that? Located in Las Vegas, NV. email rick@smallrobot.com or 702-491-6449…<a href="http://storage.ning.com/topology/rest/1.0/file/get/2060788035?profile=original" target="_self"><img class="align-full" src="http://storage.ning.com/topology/rest/1.0/file/get/2060788035?profile=RESIZE_1024x1024" width="750"></img></a></p>
<p></p>
<p>Hello,</p>
<p>I have a partially complete 701 that was my fathers. He passed away over a year ago. Need to sell the kit. Appears to be all there. According to the paperwork, it cost about $14k plus shipping. Will take offers at half that? Located in Las Vegas, NV. email rick@smallrobot.com or 702-491-6449<a href="http://storage.ning.com/topology/rest/1.0/file/get/2060788035?profile=original" target="_self"><img width="750" class="align-full" src="http://storage.ning.com/topology/rest/1.0/file/get/2060788035?profile=RESIZE_1024x1024"/></a><a href="http://storage.ning.com/topology/rest/1.0/file/get/2060788201?profile=original" target="_self"><img width="750" class="align-full" src="http://storage.ning.com/topology/rest/1.0/file/get/2060788201?profile=RESIZE_1024x1024"/></a></p>
<p><a href="http://storage.ning.com/topology/rest/1.0/file/get/2060788236?profile=original" target="_self"><img width="750" class="align-full" src="http://storage.ning.com/topology/rest/1.0/file/get/2060788236?profile=RESIZE_1024x1024"/></a></p>
<p><a href="http://storage.ning.com/topology/rest/1.0/file/get/2060788319?profile=original" target="_self"><img width="750" class="align-full" src="http://storage.ning.com/topology/rest/1.0/file/get/2060788319?profile=RESIZE_1024x1024"/></a></p> Buying a Project ??tag:zenith.aero,2018-04-29:2606393:Topic:6257792018-04-29T12:33:29.086ZR Michael Moorehttps://zenith.aero/profile/RMichaelMoore
<p>Hello Zenith Builders...</p>
<p>I am looking at the recent offers and completed sales for CH750 STOL projects on this forum. So I have come here hoping for detailed guidance on how to inspect a project to see if the work is well done. </p>
<p></p>
<p>Need to have the repairman's certificate and want to finish the build in just a few weeks. So buying a kit in progress is the solution. But how to avoid bad news and reworking mistakes?? </p>
<p></p>
<p>I want to put together a proper…</p>
<p>Hello Zenith Builders...</p>
<p>I am looking at the recent offers and completed sales for CH750 STOL projects on this forum. So I have come here hoping for detailed guidance on how to inspect a project to see if the work is well done. </p>
<p></p>
<p>Need to have the repairman's certificate and want to finish the build in just a few weeks. So buying a kit in progress is the solution. But how to avoid bad news and reworking mistakes?? </p>
<p></p>
<p>I want to put together a proper and well thought out list of details that must be checked. Your guidance and advice will be greatly appreciated. </p>
<p></p>
<p>R. M. Moore, CPA</p>
<p>Guam</p> Firewall Forward Kit for CH-801 For Saletag:zenith.aero,2015-09-03:2606393:Topic:4520932015-09-03T18:10:58.276ZMike Joslynhttps://zenith.aero/profile/MikeJoslyn
<p>Full firewall forward kit FFW for CH-801 for sale. Still in shipping crate. Includes everything except prop for IO-360 or variant. (IO-375 kit). Also has 2 LED landing lights for slat mount, wing strut fairings, and new HD horizontal stabilizer and elevator kit. Almost $12,000 invested will sell for $11,000 or best offer. If you haven't purchased a kit for your plane yet you can save a little money and still get the prop you want. Mission organization must sell.</p>
<p>Full firewall forward kit FFW for CH-801 for sale. Still in shipping crate. Includes everything except prop for IO-360 or variant. (IO-375 kit). Also has 2 LED landing lights for slat mount, wing strut fairings, and new HD horizontal stabilizer and elevator kit. Almost $12,000 invested will sell for $11,000 or best offer. If you haven't purchased a kit for your plane yet you can save a little money and still get the prop you want. Mission organization must sell.</p> CH750 Plans, Tail, and Fuse kits for saletag:zenith.aero,2015-06-18:2606393:Topic:4387872015-06-18T03:59:41.027ZMike Danielshttps://zenith.aero/profile/MikeDaniels
<p>My unfinished airplane has been sitting in storage for nearly 2 years. doesn't look like I will be able to get to it any time in the near future.</p>
<p>Gen 2 plans with serial</p>
<p>Mostly finished tail kit</p>
<p>Partially finished Fuslage kit.</p>
<p></p>
<p>All build well done and well documented.</p>
<p><a href="http://www.mykitlog.com/buells2t" target="_blank">http://www.mykitlog.com/buells2t</a></p>
<p></p>
<p>I'm in Las Vegas, NV. Currentlly Airplane kit in storage near KVGT (North…</p>
<p>My unfinished airplane has been sitting in storage for nearly 2 years. doesn't look like I will be able to get to it any time in the near future.</p>
<p>Gen 2 plans with serial</p>
<p>Mostly finished tail kit</p>
<p>Partially finished Fuslage kit.</p>
<p></p>
<p>All build well done and well documented.</p>
<p><a href="http://www.mykitlog.com/buells2t" target="_blank">http://www.mykitlog.com/buells2t</a></p>
<p></p>
<p>I'm in Las Vegas, NV. Currentlly Airplane kit in storage near KVGT (North Las Vegas Airport) </p>
<p></p>
<p>Asking $4000. or best reasonable offer, or trade for a triumph Tiger or Suzuki DL1000 V-Strom.</p>
<p></p>
<p>Maybe able to deliver some where in the South West depending on when, where, and the deal.</p>
<p></p>
<p></p>
<p><a href="http://storage.ning.com/topology/rest/1.0/file/get/2060770242?profile=original" target="_self"><img width="750" src="http://storage.ning.com/topology/rest/1.0/file/get/2060770242?profile=RESIZE_1024x1024" width="750" class="align-full"/></a></p>
<p></p>
<p></p>
<p>Mike Daniels</p>
<p>702-283-2781</p>
<p>buells2t@gmail.com</p>