Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Open Discussion Forums (non model specific) (762)
| Discussions | Replies | Latest Activity |
|---|---|---|
 Rotax 912 BafflesI seem to have noticed that my engine compartment is hot and it seems like the air is hanging around the carbs area. I am sure there will b… Started by Rob Matthews |
2 |
Jun 25, 2010 Reply by Bob McDonald |
 Wheel ChalksOn my 701 on run up my brakes can not hold the 701. I came across some simple wheel chalks made from ABS plumbing pipe and fittings. They… Started by Debra and Patrick Nesbitt |
0 | Jun 24, 2010 |
CAMERA'SI've enjoyed looking at all the really great photos everyone has submitted which has got me wondering on what type of camera you are using… Started by Debra and Patrick Nesbitt |
8 |
Jun 24, 2010 Reply by Jonathan Porter |
 Solid riveting zenith aircraftHi zenithlanders, Just wondering if there is anyone out there who has attempted solid riveting any of the zenith range. Currently thinking… Started by Jacob |
7 |
Jun 23, 2010 Reply by Jacob |
 Trimming lower CowlingHi folks. I and my Pardner Bill Marvel are in the final assembly stages of assembly on our 801. We installed a o360 with a constant speed p… Started by Robert Caskey |
1 |
Jun 2, 2010 Reply by Robert Caskey |
 Rotax 912uls wrong rotationEngine was inadvertantly rotated in wrong direction two revolutions. Will this damage the engine. and is there anything that must be done i… Started by Thomas Richardson |
7 |
Jun 1, 2010 Reply by Thomas Richardson |
 Solid rivets questionI am not familiar with solid rivets in the larger sizes. Can the upgrade solid rivets be set with a hand squeezer, or must they be driven w… Started by Jay Bannister |
9 |
May 28, 2010 Reply by Phill Barnes |
 Oops!While back-drilling holes for the top skin of the fuselage of my 650 I accidentally missed one of the existing holes on the back bulkhead a… Started by Jerold Ebke |
10 |
May 27, 2010 Reply by Jerold Ebke |
 No Canada Zenair Fly inWhy is there never a Canada all Zenair Fly-in?. Is the support lost in Canada?. Is this not the country where the Zenairs started? Started by Marcel de Vlieger ( "the Flyer") |
10 |
May 23, 2010 Reply by Marcel de Vlieger ( "the Flyer") |
 Rotax 912 Fuel Pump - Safety AlertAnyone flying a Rotax 912 series engine should pay attention to the "Mandatory SB-912-53" service bulletin. It deals with the replacement o… Started by Bob McDonald |
3 |
May 22, 2010 Reply by Bob McDonald |
New from Zenith:
Custom Instrument Panels
for your Zenith:
Custom instrument panelsare now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, power distribution panel, Approach Fast Stack harnesses, Dynon and Garmin avionics, and more.
Zenith T-shirts and Hats:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz.
The official Zenith Aircraft DVD has been updated with new footage and features, and now includes the STOL CH 750 and the ZODIAC CH 650.
© 2013 Created by Zenith.Aero.
