Online Community of Zenith Builders and Flyers
Sort by:
Discussions | Replies | Latest Activity |
---|---|---|
Main Spar Carry-through Tubing PadI had a couple of sunshade clips riveted to the main spar carry-through tube that I wanted to remove. (I had since installed static-cling t… Started by John Austin |
4 |
Feb 5, 2014 Reply by Walt Snyder |
Vertex VAX-710 TransceiverAny experience with this radio? Thinking of installing it in a 701. Started by Doug Marshall |
0 | Feb 2, 2014 |
Flaperon slotsA while back there was a post on here about getting rid of the flapperon slots, can't seem to find it now. Can anyone point me in the right… Started by Gerry Winch |
3 |
Jan 22, 2014 Reply by Gerry Winch |
Icom Radio IntercomThis sort of relates to my 750 completion. I purchased an Icom A210 at OSH for two reasons - there was a special discount on the price and… Started by Norm Neuls |
5 |
Jan 22, 2014 Reply by Tim Juhl |
Form BlocksWhat is best material to use to make form blocks? Regular plywood, MDX, regular lumber??? Started by Gaston Brawley |
11 |
Jan 21, 2014 Reply by Earnest Fontenot |
AutopilotI am wanting yo add an autopilot to my Zenith 601 HDS and am looking for plans for mounting the servos. Anyone done that? Started by J Garth Thompson |
4 |
Jan 15, 2014 Reply by Bob Pustell |
750 Elevator to Hor Stabilizer Center boltIt seems to me, that rather than have a AN365 elastic nut, on a crucial control connection with tons of movement over it's lifetime, in the… Started by Christopher Braun |
2 |
Jan 10, 2014 Reply by Bob Pustell |
Flush/flat rivets around bungee pinJust talked to Roger at factory, and he said they are going to change the drawings to make the 4 rivets around each side of the bungee pin,… Started by Christopher Braun |
0 | Jan 8, 2014 |
Acrylic Drill BitsDoes anyone have contact information to purchase 60 degree bits sizes: 40 and #11 for acrillic? Started by Gerald |
7 |
Jan 7, 2014 Reply by Diane Bancroft |
Corvair buildingQuestion on using a conventional engine stand- since the corvair engine can't be mounted to the stand by the bell housing because the prop… Started by Frederick Schutt |
6 |
Jan 4, 2014 Reply by Blaine Schwartz |
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero. Powered by
Exlusive online community for active builders and pilots of Zenith Aircraft kits (Chris Heintz / Zenair light airplane designs).