Online Community of Zenith Builders and Flyers
Sort by:
Discussions | Replies | Latest Activity |
---|---|---|
Corvair Cylinder HeadsQuestions- Do I need to make arrangements ahead of sending my heads to Falcon Machine? Or just send them? I've tried to make contact by ph… Started by Frederick Schutt |
4 |
Mar 21, 2014 Reply by Vance Lucas |
Clock Build DXF FilesA couple of members asked for this. Admin welcome to take down if this is in conflict with Zenith. All files are in inches, accuracy is 3 d… Started by Scott Sutton |
3 |
Mar 20, 2014 Reply by Michael J. Aichele |
Cleaning up water-troubled aluminiumWhen my wings kit arrived it sat in my back yard for quite a while before I was ready to get the skins out. During that time we had our one… Started by Paul Sanders |
4 |
Mar 16, 2014 Reply by Joe Harrington |
Workbench heightGood Day All, I am currently setting up my workshop and would like some recommendations as to the ideal workbench height. I'm not the tal… Started by Brendon Tadgell |
6 |
Mar 15, 2014 Reply by Walt Snyder |
Hds cruiseI went for a fly today haven't been up for a while but on the way back I was punching into 5kt headwind and was mucking around with the tri… Started by Brendon Lindfield |
5 |
Mar 13, 2014 Reply by Timothy D. McCall |
Zenith 701 fiberglass engine cowling for jabiru 2200I have a zenith 701 engine cowling for sale $ 350.00 does not include shipping Call Bruce 816 262-5182 Started by Bruce crum |
2 |
Mar 10, 2014 Reply by Bruce crum |
Zenith 601XL brake mechanism protrudes below bottom of wheel rimPart of my brake mechanism protrudes below the lowest level of the wheel rim. That means damage could occur in a flat tire situation. It lo… Started by John dobbins |
3 |
Mar 6, 2014 Reply by Matthew walker |
750 Rudder nose skinWhen completing the rudder I kept the edge of the nose skin under the trailing skin edge. The plans did not state that it should have been… Started by David Lynch |
5 |
Mar 5, 2014 Reply by David Lynch |
Drilling out Avex RivetsWhat is the best technique for drilling out the pulled rivets? Started by Gaston Brawley |
7 |
Mar 3, 2014 Reply by Randy Boykin |
Solid rivetsJust curious as I am not an engineer or an A&P. I can understand a max/min on a shop head diameter (manufactured head) and a minimum o… Started by Tim Smart |
5 |
Mar 2, 2014 Reply by Tim Smart |
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero. Powered by
Exlusive online community for active builders and pilots of Zenith Aircraft kits (Chris Heintz / Zenair light airplane designs).