Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Jabiru Engine Forum (123)
| Discussions | Replies | Latest Activity |
|---|---|---|
Oil cooler adapter installationi have oil seeping from the oil cooler adapter where it mates with the engine block. Besides a new o ring is anyone using Teflon paste, gas… Started by Joe Donohue |
2 |
Mar 23, 2022 Reply by Joe Donohue |
3300 air filter sizeHi Could anyone help with the air filter size that goes in the Jabiru fire wall forward kit. Here are some photos. The recommended nappa 6… Started by Andrew Conroy |
7 |
Mar 22, 2022 Reply by Scott Matthews |
Solid-State Oil Pressure SensorIt seems that the VDO resistor-type oil pressure sensors commonly installed on the Jab 3300 routinely wear out every couple of hundred hour… Started by John Austin |
22 |
Mar 18, 2022 Reply by Michel Royer |
Next engine class for Jabiru (Tennessee) is Dec 3rd-4thhttp://www.flylightning.net/jabiru-engine-class.html Started by Bob Simmons |
11 |
Dec 4, 2021 Reply by Bob Simmons |
Oil useage / oil in collection tank questionI have about 10 hours on my 3300 Gen 3. I am seeing the oil collection tank/air - oil separator (the plastic one attached to the crankcase… Started by Grant G Ziebell |
8 |
Nov 20, 2021 Reply by John Burns |
Whirlwind prop - what pitch seems to work best?I am using the Whirlwind prop that came with my FWF kit from Arion. Curious as to what pitch other folks with this prop are using and what… Started by Grant G Ziebell |
1 |
Nov 20, 2021 Reply by John Burns |
Gen 4 Engine Owners - rf Noise Experience?There used to be a lot of buzz (pun intended!) about excessive rf noise generated by early Jabiru engines. My engine (#2427) was built in… Started by John Austin |
1 |
Nov 17, 2021 Reply by John Burns |
Jabiru 3300 EGT readings extreme fluctuationI have a 601XLB with a Jabiru 3300, Dynon 100 and 120. The EGT readings on #1 and sometimes on #2 and #3 fluctuate from normal to extremely… Started by Joe Donohue |
3 |
Sep 27, 2021 Reply by Joe Donohue |
Push rod tube leaking oilMy 3300A s/n 1003 just started leaking oil from the #1 cylinder forward push rod tube at the crankcase. Looks like a pretty easy fix but ju… Started by Joe Donohue |
1 |
Sep 21, 2021 Reply by Mark Wood |
Exhaust stack to muffler leakageDuring a pre-flight inspection I noticed what appeared to be exhaust stain on the inside of the cowling. It looked to be adjacent to where… Started by Grant G Ziebell |
4 |
Sep 13, 2021 Reply by Grant G Ziebell |
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
