Classified / For Sale Postings - Zenith Aircraft Builders and Flyers2024-03-29T13:10:10Zhttps://zenith.aero/forum/categories/classified-for-sale-postings/listForCategory?categoryId=2606393%3ACategory%3A4596&feed=yes&xn_auth=no2007 Zenith 601xl for saletag:zenith.aero,2024-03-18:2606393:Topic:9270572024-03-18T18:49:57.273ZRandy Ferrihttps://zenith.aero/profile/Randy41
<p>I just listed my 601 on barnstormers. Plane has 1990 hrs on it with a Jabiru 3300 gen2 engine with 200hrs. Basic instruments with GRT 4000 engine monitor and an Old Lowrance 2000 GPS. I don't use that anymore, I have an Ipad mini mount for adsb in (no adsb out) and an MGL comm radio. Price is $18,900</p>
<p>You can email me at rpf789@gmail.com with questions.</p>
<p></p>
<p>Randy</p>
<p>I just listed my 601 on barnstormers. Plane has 1990 hrs on it with a Jabiru 3300 gen2 engine with 200hrs. Basic instruments with GRT 4000 engine monitor and an Old Lowrance 2000 GPS. I don't use that anymore, I have an Ipad mini mount for adsb in (no adsb out) and an MGL comm radio. Price is $18,900</p>
<p>You can email me at rpf789@gmail.com with questions.</p>
<p></p>
<p>Randy</p> 801 Projecttag:zenith.aero,2024-03-15:2606393:Topic:9266282024-03-15T10:28:32.394Zwill luggarhttps://zenith.aero/profile/willluggar
<p>Listed a 801 project on barnstormers, anyone looking to finish one up this would be a great project.</p>
<p>Listed a 801 project on barnstormers, anyone looking to finish one up this would be a great project.</p> Lycoming 235 c1 engine,mount,and cowling for saletag:zenith.aero,2024-03-15:2606393:Topic:9267872024-03-15T02:36:14.008ZJason Barneshttps://zenith.aero/profile/JasonBarnes
<p>235 c1 Lycoming 108 hp for sale. 8k. engine logs also have mags and starter<br/>located Maine </p>
<p>235 c1 Lycoming 108 hp for sale. 8k. engine logs also have mags and starter<br/>located Maine </p> Grand Rapids Technologies EIS engine instrument system for Rotax 912tag:zenith.aero,2024-03-14:2606393:Topic:9267802024-03-14T18:59:22.937ZPeter Chapmanhttps://zenith.aero/profile/PeterChapman
<p>From a recently parted-out 1999 Zenair. This was the model for the Rotax 912 at the time (EIS-3-Adv-W/912).</p>
<p></p>
<p>$800 Canadian. </p>
<p></p>
<p>Measures: tach, 2 EGT, 2 CHT, oil pressure, oil temperature, coolant temperature, bus voltage, fuel flow (& totalizer), fuel pressure.</p>
<p> </p>
<p>Sensors can be included, other than the Flowscan fuel flow meter.</p>
<p> </p>
<p>(Prefer to sell EIS with the Rotax 912 that is also advertised.)</p>
<p> </p>
<p>Peter Chapman …</p>
<p>From a recently parted-out 1999 Zenair. This was the model for the Rotax 912 at the time (EIS-3-Adv-W/912).</p>
<p></p>
<p>$800 Canadian. </p>
<p></p>
<p>Measures: tach, 2 EGT, 2 CHT, oil pressure, oil temperature, coolant temperature, bus voltage, fuel flow (& totalizer), fuel pressure.</p>
<p> </p>
<p>Sensors can be included, other than the Flowscan fuel flow meter.</p>
<p> </p>
<p>(Prefer to sell EIS with the Rotax 912 that is also advertised.)</p>
<p> </p>
<p>Peter Chapman pmchap@gmail.com Toronto, Ontario</p> Used Rotax 912UL enginetag:zenith.aero,2024-03-14:2606393:Topic:9267112024-03-14T15:33:47.556ZPeter Chapmanhttps://zenith.aero/profile/PeterChapman
<p>About 650 hrs flight time, or 750 hrs engine time from 1999-2021.</p>
<p> </p>
<p>Located in Thornbury, Ontario (near Collingwood), CANADA.</p>
<p></p>
<p>Paid for full gearbox inspection & gearbox rebuild by certified Rotax mechanic (dye penetrant, magnetic particle, runout etc. inspections) after it had a propstrike in 2021 on a lightweight Ivoprop (which shattered). No slipper clutch on this version. Everything is still within specs! </p>
<p> </p>
<p>Carburetors were fully…</p>
<p>About 650 hrs flight time, or 750 hrs engine time from 1999-2021.</p>
<p> </p>
<p>Located in Thornbury, Ontario (near Collingwood), CANADA.</p>
<p></p>
<p>Paid for full gearbox inspection & gearbox rebuild by certified Rotax mechanic (dye penetrant, magnetic particle, runout etc. inspections) after it had a propstrike in 2021 on a lightweight Ivoprop (which shattered). No slipper clutch on this version. Everything is still within specs! </p>
<p> </p>
<p>Carburetors were fully overhauled by the same mechanic in 2020. (New floats, seals, rubber, ultrasonic carb cleaning etc.) Made it start & run nice and smooth.</p>
<p> </p>
<p>Asking $8000 Canadian.</p>
<p> </p>
<p>Other accessories available for sale from the original engine installation, such as:</p>
<p>Rotax coolant radiator</p>
<p>Grand Rapids EIS engine instrument (version for the 912)</p>
<p> </p>
<p>Peter Chapman pmchap@gmail.com</p> Zenair CH750 CRUZER partly-assembled kit (in Ontario) SOLDtag:zenith.aero,2024-03-14:2606393:Topic:9267082024-03-14T15:28:04.654ZPeter Chapmanhttps://zenith.aero/profile/PeterChapman
<p></p>
<p></p>
<p>2018 kit. Serial #C75-10856. One wing & tail surfaces assembled (& clecoed as needed for inspection). Fuselage partially assembled.</p>
<p></p>
<p>Located in Thornbury, Ontario (near Collingwood), CANADA.</p>
<p></p>
<p>Included are the full Zenair/Zenith Airframe kit, Finishing kit (that includes gear, windshield, etc.), plus the Upholstery kit, Dual Sticks kit, Clecos, but does not include engine, engine mount, instruments. </p>
<p> </p>
<p>(I also have a used…</p>
<p></p>
<p></p>
<p>2018 kit. Serial #C75-10856. One wing & tail surfaces assembled (& clecoed as needed for inspection). Fuselage partially assembled.</p>
<p></p>
<p>Located in Thornbury, Ontario (near Collingwood), CANADA.</p>
<p></p>
<p>Included are the full Zenair/Zenith Airframe kit, Finishing kit (that includes gear, windshield, etc.), plus the Upholstery kit, Dual Sticks kit, Clecos, but does not include engine, engine mount, instruments. </p>
<p> </p>
<p>(I also have a used Rotax 912, Microair radio, and EIS engine display available separately, from the previous Zenair my dad & I built & flew.)</p>
<p> </p>
<p>Unused hardware is still in the original sealed bags. The Cruzer kit is pre-punched and self-aligning so it assembles quickly.</p>
<p> </p>
<p>Current kit costs would be about $60,000 Canadian; prices have increased in recent years. Original owner did much of the work so far; my dad bought the kit from him and mostly finished the tail. He had fun puttering around on the project but realizes he's getting too old to finish another plane.</p>
<p></p>
<p>Asking $24,000 Canadian.</p>
<p></p>
<p>Peter Chapman pmchap@gmail.com</p>
<p> </p> want to buy' engine cylinder assembly for a Lycoming O-235 C1?tag:zenith.aero,2024-03-13:2606393:Topic:9266122024-03-13T17:17:10.531ZTim Durahttps://zenith.aero/profile/TimDura
The acceptable part numbers are;<br />
73243<br />
71829<br />
LW.17982<br />
LW 16701<br />
LW 16704<br />
<br />
Please contact me here or at timdura178@gmail.com<br />
<br />
Tim
The acceptable part numbers are;<br />
73243<br />
71829<br />
LW.17982<br />
LW 16701<br />
LW 16704<br />
<br />
Please contact me here or at timdura178@gmail.com<br />
<br />
Tim Want to by Dynon AP74 Autopilot interfacetag:zenith.aero,2024-03-12:2606393:Topic:9265132024-03-12T18:57:01.099ZSamuel McNairhttps://zenith.aero/profile/SamuelMcNr
<p>If any of you out there have a Dynon AP74 autopilot interface module that you want to sell, please contact me. I have a panel based on the older D180 D120 series units and dont want to spend $10k's upgrading a perfectly good panel just to get an autopilot interface. Thanks</p>
<p>Sam McNair ssm6791@gmail.com</p>
<p>If any of you out there have a Dynon AP74 autopilot interface module that you want to sell, please contact me. I have a panel based on the older D180 D120 series units and dont want to spend $10k's upgrading a perfectly good panel just to get an autopilot interface. Thanks</p>
<p>Sam McNair ssm6791@gmail.com</p> Zodiac 601XLB starter kit for saletag:zenith.aero,2024-03-09:2606393:Topic:9266612024-03-09T17:51:23.456ZDon Walkerhttps://zenith.aero/profile/DonWalker331
<p>I've finally decided to sell my 601XLB fuselage kit that I will never finish. I think the fuselage kit, tail surfaces and other options/kits represent a good starter kit for someone looking to build a 601XL, an aircraft that I still believe is the nicest looking experimental on the market.</p>
<p></p>
<p>Along with the 601XLB fuselage kit, and a legally transferable serial number - something I never thought would be an issue - the parts include:</p>
<ul>
<li>601XL controls…</li>
</ul>
<p>I've finally decided to sell my 601XLB fuselage kit that I will never finish. I think the fuselage kit, tail surfaces and other options/kits represent a good starter kit for someone looking to build a 601XL, an aircraft that I still believe is the nicest looking experimental on the market.</p>
<p></p>
<p>Along with the 601XLB fuselage kit, and a legally transferable serial number - something I never thought would be an issue - the parts include:</p>
<ul>
<li>601XL controls kit</li>
<li>vertical tail surface (rudder with position light),</li>
<li>horizontal tail surface (with Ray Allan trim servo),</li>
<li>dual stick option,</li>
<li>both leading edge wing skins,</li>
<li>wing spar web material,</li>
<li>601XLB upgrade kit (purchased June 2020),</li>
<li>Matco brake cylinders,</li>
<li>various Tooling (pneumatic rivet gun with heads, deburring tools etc.),</li>
<li>full 4' x 12' of 6061-T6 .032" (intended as a wing skin),</li>
<li>extensive video library of helpful material, as well as printed material (plans sets & construction guide).</li>
<li>4' X 12' work table</li>
</ul>
<p>I'm looking to get about $5K CDN, which based on recent US-CDN exchange rates is about $3.7K USD.</p>
<p></p>
<p>Based just outside of Ottawa, Ontario, I can be reached at dgwalker56@gmail.com</p>
<p></p>
<p></p>
<p></p> Zenair 701 kit for sale SOLD!tag:zenith.aero,2024-03-09:2606393:Topic:9264592024-03-09T13:41:21.555ZRichard Joneshttps://zenith.aero/profile/RichardJones640
<p>Zenair 701 kit for sale. Horizontal Stabilizer, Elevator, Vertical Stab/Rudder, and Right wing complete. Rest of kit is still in shipping crate. No engine, No avionics, located in East Texas (KATA).</p>
<p>$3000</p>
<p>Will add photos shortly.</p>
<p>Contact: Here or jetpltrich@yahoo.com Phone or Text 214-287-4518</p>
<p>Zenair 701 kit for sale. Horizontal Stabilizer, Elevator, Vertical Stab/Rudder, and Right wing complete. Rest of kit is still in shipping crate. No engine, No avionics, located in East Texas (KATA).</p>
<p>$3000</p>
<p>Will add photos shortly.</p>
<p>Contact: Here or jetpltrich@yahoo.com Phone or Text 214-287-4518</p>